Extractor de fum ComMarker-100W

Best one

Mare

Amazing detail and great power

Omni 1 arrived in UK in about 10 zile. My first Galvo Laser, still learning from scratch with the lightburn software but already amazing peoples around me.
I bought the 5W with no regreat but if I have the budget, I will go for the 10W.

The staff was very helpful during the purchase process.
There were no updates about the delivery for 2 săptămâni. The linked DPD Germany did not know about this package. Then it suddenly arrived with a same day delivery notification.
The package was very nicely organzed and well protected.
The assembly of the device, the enclosure and the fume extractor was easy following the instructions. I am still missing info about the security door assembly of the enclosure. It is neither in the device manual nor in the enclosure manual.
EZCAD gives an error message. But I am used to Lightburn anyhow. It works well with Lightburn after purchasing the galvo extension.
The first engraving attempt failed. I did not realize that calibration of the 150mm lens is needed to get rid of distortion and get correct sizing. The incorrect sizing caused "gravare" on the rim of the device.
Sample projects and some of my old designs are working well. (I have not tried the 3D spider yet)
My target community likes a ot the quality of the results. Especially the colorful stainless steel.
I am considering the Omni purchase. I am looking for a comparison of the 5 and 10W versions.

Software LightBurn - LightBurn Pro License Key

The ordering process was ok, people were helpful along the way, but communication is key. I'm unsure if several people get back with you on a question or the same person per request per email, but the fume extractor came in before the laser, a few days later the laser, then a week or better the rotary and the safety shield. I had a couple of different explanations as to the shipping of the rotary, and for some reason (not sure if it was UPS communication failure or between Commarker and UPS) but the rotary just showed up with no tracking notification, so it was a shocker when the driver pulled up with the box. So like anything else you spend money on, when things don't show up as soon as planned, you worry a bit with a company you've not worked with before.
I haven't been able to use the rotary yet, I'm still learning the EZCad 2 software (not easy) and difficult to install in my view, but it's new to me.
It takes time to get the pieces of the complete setup all together, so don't get discouraged, be patient.
Până acum, bine, I made my first cut out with it last night, looks great, clean and no burns on MDF. I'll try more materials today.
The focus on the machine is crucial, all of the other settings are to be leaned and recorded by the user. There's that.
I do plan on ordering from Commarker again in the future for a fiber laser, people seem happy with them as well, Și până acum atât de bine cu achiziționarea mea de laser UV. Întregul proces de expediere pe care l -a luat tot ceea ce a avut 10 zile / Două săptămâni ai răbdare în așteptarea comenzii tale.

Toate bune până acum

Nu pot da vina serviciul și produsul au fost expediate mai devreme decât se aștepta.

Recomand cu mare drag acest brand

Aceste filtre sunt de înaltă calitate. Extractorul de fum trage o mulțime de particule fine și consider că aceste pre-filtere sunt foarte eficiente și mă salvează de la a înlocui filtrele mai scumpe Hepa și cărbune la fel de des.

With 200W model, my laser engraving capabilities is CRAZY! the material is somewhat limited, this machine is still unstoppable!

the product was packaged great, no issues with setup as the instruction manual is thorough. The machine is powerful.

Foarte fericit cu noua mea mașină

Este o mașină puternică care este ușor de utilizat.