Introducere:
Recent, some friends questioned me about how to gravator cu laser black on metal. Așa că suntem aici pentru a vă oferi o modalitate ușoară de a găsi modalitatea de a grava cu laser negru pe metal.
The main point of laser engraving dark on the metal is to keep the propel focus inside the right one.
With the same parameter, in the propel focus, it doesn’t engrave the black; inside, it burns the metal with greater power.
Only until we find the suitable focus for back marking will it give the pretty black.
So how do we find the right focus to engrave dark?
Informatii de baza:
ComMarker B4 20W gravator laser cu fibra mașinărie
We will tell you in this article.Basic information:
| Software | Lightburn |
| Mașinărie | ComMarker B4 |
| Putere de ieșire a modulului laser | 20W |
| Material folosit | Oţel inoxidabil |
| Informații materiale | 1mm |
| Făcând Timp(min) | 15min |
Setare:
| Metoda de proces | Filling/picture |
| Materialul de proces | Oţel inoxidabil |
| Viteză(mm/s) | 300 |
| Putere maxima(%) | 50 |
| Trece | 1 |
| Line space | 0.054 |
| Frecvență | 25 |
Instruire:
Pasul 1
Input some text for the test, and set the parameter as the instruction.
Pasul 2
Set the laser engraver to the right focus.
Pasul 3
Play the laser engraver and change the focus according to light strength until it reaches the propel focus.
Pasul 4
After getting the right focus distance, you may measure it and keep it for further use.
Step5
Input the file that you need to engrave.
Step6
Set the parameter according to the suggested setting.
Step7
Laser-engrave the thing you want.
