Invoering:
We found that many of our friends urge us to try something interesting. So we are here to give you some inspiration for different kinds of lasergraveerders‘ uses.
Today we bring the method of 2.5D laser engraving, and we hope you may like it. If you are also into 2.5D laser engraving, keep reading this article.
Actually, the picture for 2.5D laser engraving needs to be converted from STL, but some of the black and white are already converted and can be used directly in Lightburn.
Basis informatie:
Software | Licht branden |
Machine | ComMarker B4 JPT MOPA-vezellaser Markeermachine |
Uitgangsvermogen lasermodule | 30W |
Gebruikte materiaal | Leisteen |
Materiaalinformatie | 5mm slate |
Tijd maken(minuten) | 1 uur |
Instelling:
Procesmethode | Vulling |
Procesmateriaal | Leisteen |
Snelheid(mm/sec) | 400 |
Maximum kracht(%) | 100 |
Mode | 3D Sliced |
Interval | 0.04 |
Puntbreedte | 0.04 |
Instruction:
Step1
Test the material you want to laser engrave for the suitable parameter to achieve the effect you want.
Step2
Input the picture.
Step3
Set the parameter.
Step4
Blijf geduldig, and your work will be finished within a few hours.