Invoering:
Onlangs, some friends questioned me about how to laser graveur black on metal. Daarom zijn wij hier om u een gemakkelijke manier te bieden om de manier te vinden om zwart op het metaal te lasergraveren.
The main point of laser engraving dark on the metal is to keep the propel focus inside the right one.
With the same parameter, in the propel focus, it doesn’t engrave the black; binnen, it burns the metal with greater power.
Only until we find the suitable focus for back marking will it give the pretty black.
So how do we find the right focus to engrave dark?
Basis informatie:
ComMarker B4 20W fiber laser graveur machine
We will tell you in this article.Basic information:
Software | Licht branden |
Machine | ComMarker B4 |
Uitgangsvermogen lasermodule | 20W |
Gebruikte materiaal | Roestvrij staal |
Materiaalinformatie | 1mm |
Tijd maken(minuten) | 15minuten |
Instelling:
Procesmethode | Filling/picture |
Procesmateriaal | Roestvrij staal |
Snelheid(mm/sec) | 300 |
Maximum kracht(%) | 50 |
Doorgang | 1 |
Lijnruimte | 0.054 |
Frequentie | 25 |
![Fiberlasermarkering zwart op roestvrij staalsteel 2 image 1](https://commarker.com/wp-content/uploads/2024/02/image-1-1024x576.png)
Instruction:
Step1
Input some text for the test, and set the parameter as the instruction.
Step2
Set the laser engraver to the right focus.
Step3
Play the laser engraver and change the focus according to light strength until it reaches the propel focus.
Step4
After getting the right focus distance, you may measure it and keep it for further use.
Step5
Input the file that you need to engrave.
Step6
Set the parameter according to the suggested setting.
Step7
Laser-engrave the thing you want.