Introduksjon:
Nylig, some friends questioned me about how to lasergraver black on metal. Så vi er her for å gi deg en enkel måte å finne måten å lasergravere svart på metallet.
The main point of laser engraving dark on the metal is to keep the propel focus inside the right one.
With the same parameter, in the propel focus, it doesn’t engrave the black; inni, it burns the metal with greater power.
Only until we find the suitable focus for back marking will it give the pretty black.
So how do we find the right focus to engrave dark?
Grunnleggende informasjon:
ComMarker B4 20W fiber lasergraver maskin
We will tell you in this article.Basic information:
| Programvare | Lightburn |
| Maskin | ComMarker B4 |
| Lasermodul utgangseffekt | 20W |
| Materiale brukt | Rustfritt stål |
| Material info | 1mm |
| Å lage tid(min) | 15min |
Innstilling:
| Prosessmetode | Filling/picture |
| Prosessmateriale | Rustfritt stål |
| Hastighet(mm/s) | 300 |
| Maks kraft(%) | 50 |
| Pass | 1 |
| Linjeplass | 0.054 |
| Frekvens | 25 |
Undervisning:
Step1
Input some text for the test, and set the parameter as the instruction.
Step2
Set the laser engraver to the right focus.
Step3
Play the laser engraver and change the focus according to light strength until it reaches the propel focus.
Step4
After getting the right focus distance, you may measure it and keep it for further use.
Step5
Input the file that you need to engrave.
Step6
Set the parameter according to the suggested setting.
Step7
Laser-engrave the thing you want.
