blog

The One Laser Engraver That Can Engrave Everything — My Hands-On Test of the ComMarker Omni 1 ultravioleta

The One Laser Engraver That Can Engrave Everything

If you’ve ever researched laser engravers, you’ve probably come across the same limitations again and again:

  • Lasers de diodo can’t engrave on glass or clear acrylic.
  • Lasers de fibra can’t touch wood.
  • Co₂ lasers can’t engrave raw metal.

But what if I told you there’s another type of laser engraver—one that can engrave all of those materials, e mais? I’m talking about UV laser engraving.

Hoje, I’m sharing my full review and real-world test results using the ComMarker Omni 1, a UV laser engraver that, quite frankly, blew me away. If you’re looking for a versatile machine for your DIY workshop or laser engraving business, this review is for you.


Unboxing The Commarker Omni 1: Setup in Minutes

Let’s start with the basics. O Omni 1 UV laser engraver came in three large parts:

  1. O base (pre-attached cables)
  2. O tower (vertical column)
  3. O laser module

Assembly was simple—just 8 screws total. Four to attach the tower to the base, and another four to mount the laser head. Depois disso, plug in the cables and you’re ready to go. No complicated setup, no confusing wiring.

Honestamente, if you’ve ever struggled putting together a diode or CO₂ machine, this is refreshingly easy.

Para a ponta: It ships with two lenses—150mm and 75mm. I did most of my tests with the 150mm lens.


image 54

What Is a UV Laser Engraver (And Why It’s So Special)?

O ComMarker Omni 1 é um Gravador a laser UV, operating at 355nm with a 5W power rating. Agora, you might think 5 watts sounds weak—but don’t let that fool you.

Due to its short wavelength, the UV beam interacts differently with materials compared to CO₂ or diode lasers. It doesn’t rely on heat to burn or vaporize the surface. Em vez de, isto breaks molecular bonds, which makes it perfeito for high-detail, low-damage engraving.

And the results? They speak for themselves.


image 55

1 – Engraving on Aluminum Business Cards

Let’s start small—literally. I engraved a portrait and a logo onto black-coated aluminum business cards.

  • Resultado: Razor-sharp lines, no smudging, incredibly small spot size.
  • Detail Level: Think photorealistic at the size of a quarter.

This test alone showed me that the Omni 1 could handle the kind of precision normally reserved for machines triple the price.


image 56

2 – Engraving on Wood

Agora, you might assume UV lasers aren’t ideal for wood—but guess what? It engraved my sample wood blocks beautifully.

Dica: Settings matter. My first test ran too powerful and scorched the wood. Once I dialed in the frequência, Pulso Q, and line spacing, the engraving looked amazing.

No soot, no char, just a clean, crisp image of my daughter on birch.


3 – Ceramic Coasters

One of my favorite materials to engrave is ceramic, e o omni 1 nailed this job.

  • No masking tape
  • No pre-treatment
  • Just pure UV power directly onto the surface.

If you’re thinking of adding engraved coasters to your product line—wedding gifts, company swag—this machine can handle it with ease.


image 57

4 – Stainless Steel and Brass

Here’s where the ComMarker Omni 1 truly shined.

  • Aço inoxidável: Produced a deep black mark that I’ve never been able to get from my fiber laser.
  • Brass Coins: Dark, legível, and no distortion, even on small text.

This alone makes it a great gravador a laser para metal if you want high-contrast marking without a fiber laser.


image 58

5 – Engraving on Felt & Cutting Cleanly

O Omni 1 includes some felt samples, and engraving was perfect—clean, no burn-through on the backside.

But I also tested cutting felt, using a thin cross shape. The cut was sharp, com zero char or melted edges. Honestamente, it looked like I used a scalpel, not a laser.


image 59

6 – Wax Tin Labels

Normally I use printed labels for my wax tins—but this time I engraved directly onto the metal lid. No smudging, no irregularities. The UV beam handled the curved surface and coating like a champ.

This could be a total game-changer for product packaging.


image 60

7 – Clear Acrylic and Glass

Here’s the moment you’ve been waiting for.

Clear acrylic? Verificar.
Vidro? Absolutamente.

No marking spray. No coating. Just place the object on the bed and go.

I tested:

  • A flat glass panel with my logo
  • A reused pickle jar
  • A glass ornament (with gold paint fill)

All engraved beautifully. The only challenge was with round objects—without a rotary tool, getting the focus right is tricky. But with a rotary? You’re in business.

Business idea: Engraved ornaments, taças de vinho, lembrancinhas de casamento.


image 61

8 – Leather Patches

I engraved both brown and gray leather patches. The results were surprisingly consistent:

  • No burn smell
  • No cleanup needed
  • Just clean, linhas definidas

These are ready to press onto hats or bags—no extra steps required.


image 62

9 – Cutting 3mm Wood (Sim, Corte!)

Most people say UV lasers are for marking only. But I tried cutting 3mm birch plywood using the inlay pattern “Faith,” and…

It cut beautifully.

There was no charring on the edges, no burning smell, and the final piece popped out easily. For hobbyists or small crafts, this machine can absolutely double as a cutter on thin materials.


image 63

10 – FOOD ENGRAVING (Sim, Seriamente!)

I engraved:

  • An apple
  • An orange

O resultado? No burnt smell. No flavor change. Just clear, surface-level engraving.

While you’re probably not engraving fruit daily, imagine this: engraved cookies or macarons for weddings, aniversários, or branded events. That’s a whole new revenue stream.


ComMarker Omni 1 gravador a laser

$4,499 $3,999 Salvar:$500

Laser de última geração para desbloquear todos os materiais. Tecnologia de gravação ZeroBurn™ O primeiro gravador a laser 16K HD do mundo Sistema de gravação SpeedMax™ de 10.000 mm/s Desbloqueie todo o material com laser UV Tecnologia térmica ColdFront™ Elevação elétrica com 2 Lentes opcionais compatíveis com sistema de gravação rotativa EZCAD e LightBurn 360°

110V
220V
5C
10C
Omni 1 Pacote Básico
$4,499 $3,999 Save:$500

Omni 1 Basic Bundle
Contains:
·ComMarker Omni 1 Machine
·Field lens*2 (70mm&150mm)
·Lifting Platform
·Material Pack
·Safety Goggles
·Material Coupon – Extra 20% off

Omni 1 Pacote Rotativo
$4,883 $4,259 Save:$624
Hot Sale

Omni 1 Rotary Bundle
Contains:
·All of OMNI 1 Basic Bundle
·R5 Multi-Functional Rotary

Omni 1 Pacote definitivo
$5,481 $4,639 Save:$842
Premium Selection

Omni 1 Ultimate Bundle
Contains:
·All of OMNI 1 Basic Bundle
·R5 Multi-Functional Rotary
·100W Fume Extractor
·Safety Shield

Who Is This Laser Engraver For?

Se você está procurando um laser engraver that can handle every material, O Commker Omni 1 UV laser is a solid choice.

  • Not just for hobbyists
  • Great for small business owners
  • Perfect for people unsure what niche to start in

$4,000 might sound high, but considering it replaces the need for multiple machines (diodo, fibra, Co₂), it’s actually a good deal.

You could start engraving:

  • Etiquetas de identificação
  • Ornaments
  • Wood signs
  • Vidraria
  • Montanhas -russas
  • Leather patches
  • Embalagem
  • Business gifts
  • Even food

—without needing to buy a second laser.


Quick Specs: ComMarker Omni 1 ultravioleta

  • Tipo Laser: ultravioleta, 355comprimento de onda nm
  • Poder: 5C
  • Lente: 150milímetros (included), 75mm optional
  • Supported Materials: Metal, plástico, vidro, cerâmica, madeira, couro, acrílico, comida, e mais
  • Tamanho do ponto: Extremely fine for high-resolution detail
  • Focus System: Dual red dot alignment + motorized focus
  • Control Software: LightBurn compatible
  • Gabinete & Rotativo: Optional accessories available

Is the ComMarker Omni 1 the Best Laser Engraver in 2025?

If versatility is your top priority, this might be the best laser engraver for 2025—especially for beginners who want room to grow or pros looking to expand into new materials.

🔗 Check current pricing and bundles on ComMarker’s official store →

Sobre David Lee

Olá, Eu sou David Lee, Sou um gravador a laser comercial profissional apaixonado e criativo e especialista em marcação com uma vasta experiência e uma ampla gama de conhecimentos. Nos últimos 10 anos, Tenho me concentrado em gravadores a laser e soluções de marcação para diversos projetos comerciais. Sou sensível a novas tecnologias e tendências de design ,buscando constantemente a melhor experiência em gravação e marcação a laser

Deixe uma resposta