لون |
ذهب, فضة |
---|---|
أسلوب |
عظم, قطة, سمكة, قلب, مستطيلة |
المعلقات الفولاذ المقاوم للصدأ للنقش بالليزر (10جهاز كمبيوتر شخصى)
$13 $10 يحفظ:$3
🌿 كل $4,000 شراء, فتح لوحة Freecutting ($249 قيمة)
آمن & يؤمن
الدفع

ًالشحن مجانا

-
شحن مجاني في جميع أنحاء العالم
-
ماكينة ليزر:2- ضمان عام
-
دعم التمويل (كلارنا)
دع العملاء يتحدثون نيابة عنا
من 849 المراجعاتthis laser is awesome

If you want to utilize the full flexibility of B6, additional field lenses are a must. These are good quality. Even though the packaging looks like it was kicked all the way from China. The lens is well padded so it was in good shape.

Es perfecto para manualidades para mi hija .
Lenhice una mariposa en los tres tonos y está súper feliz

يعمل بشكل رائع, very easy to learn how to use it.

The B4 50W Q-switched laser strikes an excellent balance between performance and cost.
At first I was concerned that it used a MAX laser source since a lot of people recommend avoiding MAX. Since the price was very good, I looked for the primary reason behind the lower recommendations and found that it was due to the historically low frequency range of the MAX Q-switched lasers compared to other Q-switched lasers. When I looked at the specifications on the ComMarker site they didn’t seem to match the specifications from older reviews I had read. I asked ComMarker for the specific model number and they provided me with a sample copy of a test report that gave me the model number and tested specifications. It turns out they are using a newer model of the laser module and I was able to verify the specifications from the MAX website and another MAX distributor website. It is a better version than their older models and is now more comparable to its competitors. For those curious I’ve attached a picture of my test report.
With that settled, I pulled the trigger and ordered it. Just after I ordered the chaos of the tariff changes began. I contacted ComMarker and they assured me they would be able to fulfill the order at the price I paid and that taxes and duties would be included.
Once it shipped I received it from overseas about three days later. Everything was packed well and arrived in perfect condition. Between the assembly video and manual they provided I was able to get the laser setup quickly and perform some initial tests.
I ended up deciding to build an enclosure so that I could customize it to suit my needs and fit my work space. I look forward to using the B4 more often once I am able finish the enclosure and ventilation system and would definitely purchase from ComMarker again, مع Omni 1 being high on my list.

I am very impressed with the setup and quality of the liquid cooled version of this 10 Watt UV laser. Set up was mostly easy. I had to calibrate the lens, but that was easy using LightBurn. I just wish they had the red laser preview like on the B6 model and maybe the auto-focus too.

أحتاج إلى ليزر لتعزيز عملي CNC, بعد أبحاث مكثفة, ضرب نطاق البرجي العلامة من الدعم إلى النطاق. في النهاية ، اختار B4 50W لتكمل العمل المعدني الذي أقوم به.
لم أشعر بخيبة أمل ودعم SPANCER عندما تم الاقتراب كان رائعا.

أستخدم هذه العملة على وجه الحصر. أنها توفر نتائج متسقة. لديهم وزن جيد وملمس. زبائني يقدرونهم.

اشتريت العلبة لـ Omni1 لحماية قطتي الصغيرة الفضولية للغاية. لا يمكنها ارتداء النظارات/ النظارات الممتازة التي يتم توفيرها. يضيء العلبة عن طريق الوصول إلى المصباح المثبت على سطح LED من خلال باب الواقي جيد. التجميع سهل ولكن الكثير من البراغي. المواد الرئيسية الألومنيوم والأكريليك جميعها تم تثبيتها بشكل آمن معا. يعمل بشكل جيد.

إنه لشيء رائع, لقد عملت بشكل مثالي للكائن غير المنتظم الذي أردت نقشه. إذا كان لديك أي معدات أخرى تريد مني مراجعتها, سأكون سعيدا للقيام بذلك!

حاملة بطاقات معدنية/محفظة مزودة بتقنية حجب RFID (قطعة واحدة)

منتج رائع آخر من SPANCHER

المعلقات الفولاذ المقاوم للصدأ للنقش بالليزر (10جهاز كمبيوتر شخصى)
أحضر جارتي هذا المختبر الجميل إلى المنزل وكان بحاجة إلى بطاقة اسم. كنت أرغب في التدرب على نقش الفولاذ المقاوم للصدأ, (الصلب), وخرج هذا المشروع بشكل مثالي. ماي كومماركر B4 30 قام واط فايبر ليزر بعمل رائع. الإعداد كان - 35% قوة, 50 مم/ثانية, 25 كيلو هرتز, .0254/1000خطوط لكل بوصة, مع تمريرتين +-45 درجات. أتاحت ميزة التأطير بالليزر في B4 نصًا محاذيًا تمامًا. الشيء الوحيد الذي يجب تذكره, يكون, للسماح للعلامة بالتبريد لعدة دقائق حيث تقوم عملية التلدين بتسخين العلامة إلى درجة حرارة عالية, (لقد لمست ذلك بسرعة كبيرة مرة واحدة فقط), قبل إزالته من سرير العمل. هذه العلامات عبارة عن درجة جيدة جدًا من الفولاذ المقاوم للصدأ ولا يوجد بها أي صلة بالمغناطيس. بسعر ~ دولار واحد لكل منهما, إنه أفضل سعر ستجده. والشحن المجاني جعل عملية الشراء هذه أمرًا لا يحتاج إلى تفكير, (وهو ما أؤهله بألوان متطايرة)...
العلامات المستطيلة رائعة أيضًا ....