Material Settings for ComMarker Machines
コムマーカー レーザー彫刻機 and markers can engrave and cut a huge variety of materials, from something as slim as tissue paper to something as thick as leather and wood panels. The only limitation may be your imagination.
These laser parameters have been tested mostly with our ComMarker laser engraver, but they can also be applied to other power laser sources in the market. Understand that the result on your material can be different from the result shown in the videos. That happens for various factors such as other material components, different power laser source quality, a different lens, 等.
基本情報: 設定: 基本情報: 基本情報: 基本情報: 設定: 基本情報: 素材情報 時間を作る(s) 30S スピード(mm/s) 25 基本情報: 機械:コムマーカー B4 モパ レーザーモジュールの出力:60W 使用素材:PCD 素材情報:PCDボード 時間を作る(分):30s 設定: 充填専用 加工方法:充填 プロセス材料:PCDボード スピード(mm/s):2000 マックスパワー(%):60 合格:6 行間:0.03 基本情報: 充填専用: Process Method Hatching 基本情報: 基本情報: 充填専用: 基本情報: Engraving Setting: Clean Setting: 基本情報: ソフトウェア: EZCAD2 設定: スピード(mm/s): 1000 充填専用: 充填専用: 合格 1 Software Ezcad 充填専用:
基本情報: 設定: 基本情報: 基本情報: 基本情報: 設定: 基本情報: 素材情報 時間を作る(s) 30S スピード(mm/s) 25 基本情報: 機械:コムマーカー B4 モパ レーザーモジュールの出力:60W 使用素材:PCD 素材情報:PCDボード 時間を作る(分):30s 設定: 充填専用 加工方法:充填 プロセス材料:PCDボード スピード(mm/s):2000 マックスパワー(%):60 合格:6 行間:0.03 基本情報: 充填専用: Process Method Hatching 基本情報: 基本情報: 充填専用: 基本情報: Engraving Setting: Clean Setting: 基本情報: ソフトウェア: EZCAD2 設定: スピード(mm/s): 1000 充填専用: 充填専用: 合格 1 Software Ezcad 充填専用:
基本情報: 設定: 基本情報: 基本情報: 基本情報: 設定: 基本情報: 素材情報 時間を作る(s) 30S スピード(mm/s) 25 基本情報: 機械:コムマーカー B4 モパ レーザーモジュールの出力:60W 使用素材:PCD 素材情報:PCDボード 時間を作る(分):30s 設定: 充填専用 加工方法:充填 プロセス材料:PCDボード スピード(mm/s):2000 マックスパワー(%):60 合格:6 行間:0.03 基本情報: 充填専用: Process Method Hatching 基本情報: 基本情報: 充填専用: 基本情報: Engraving Setting: Clean Setting: 基本情報: ソフトウェア: EZCAD2 設定: スピード(mm/s): 1000 充填専用: 充填専用: 合格 1 Software Ezcad 充填専用: 機械 :B4 20W
110mm lens refocused 1-2 んん
ソフトウェア: エズカド
スピード: 330 また 300
力: 85 また 80
頻度: 55 また 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
時間を作る(分) 15分
設定:
Process Method Filling/picture
Process Material Stainless steel
スピード(mm/s) 300
マックスパワー(%) 50
合格 1
行間 0.054
頻度 25機械:B4 20W
200mm lens refocused 3mm
ソフトウェア:ライトバーン
スピード: 750
力: 60
頻度: 80khz
Lines per inch:0 .02
2 パスする機械:B4 30W
110mm lens with correct focus
ソフトウェア:lightburn
スピード:1000
力: 90
頻度:50khz
Lines per inch: 0.02
Angle:45
400 パスする
Then finishing
スピード: 2000
力: 30
頻度: 100
Lines per inch:0.05
Angle:45機械:B4 30W
200mm lens as a fill
ソフトウェア:lightburn
スピード:1500
力: 50
頻度:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
時間を作る(分) 10
Process Method Image
Process Material Ceramic tile
スピード(mm/s) 1000
マックスパワー(%) 40
合格 1
行間 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
頻度 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
時間を作る(Hour) 5H
設定:
Process Method 3D sliced
Process Material Aluminum plate
スピード(mm/s) 2000
マックスパワー(%) 90
Mode 3D sliced
Interval(んん) 0.0254
Q-Pulse 45
頻度 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
時間を作る(分) 3分
設定:
Process Method ID card
Process Material ID card
スピード(mm/s) 2000
マックスパワー(%) 40
合格 1
行間 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
時間を作る(分) 10-15分
Process Method Line
Process Material Silver board(1mm)
スピード(mm/s) 1000
マックスパワー(%) 90
頻度 40
Q-pulse width 200
合格 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
使用素材
Battery,aluminum sheet
Battery,aluminum sheet
設定:
Process Method Laser Welding
プロセス材料
Battery,aluminum sheet
マックスパワー(%) 100
頻度(KHz) 100
合格 1
ソフトウェア:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
時間を作る(分) 3 分
設定:
Process Material Rusted coin
スピード(mm/s) 1000
マックスパワー(%) 90
Pass Depends on how rusted the material is
行間 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
時間を作る(分) 1 hour
設定:
Process Method Filling
Process Material Slate
スピード(mm/s) 400
マックスパワー(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
時間を作る(s) 58
Process Method Filling
Process Material Stainless steel
スピード(mm/s) 120
マックスパワー(%) 100
合格 1
ソフトウェア: ライトバーン
機械: ComMarker B4 60W-mopa
レーザー出力:620W
使用素材:BRASS
素材情報: COIN
時間を作る(分): 6hr50mins
スピード(mm/s): 2000
頻度(Khz): 100
マックスパワー(%): 90
合格: 512
行間: 0.025
Dot width:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
スピード(mm/s): 2500
頻度(Khz): 200
マックスパワー(%): 90
合格: 1
行間: 0.015
Dot width:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
機械: コムマーカー B4 20W
レーザー出力: 20W
使用素材: BRASS
素材情報: COIN
時間を作る(分): 23MINS
頻度(Khz): 30
マックスパワー(%): 90
合格: 157
行間: 0.02
Dot width:
Hatch Mode:
Q Pulse Width (nm):only for mopa machines
基本情報:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Acrylic
Material Info 3mm
時間を作る(s) 36
Process Method picture
Process Material Acrylic
スピード(mm/s) 500
マックスパワー(%) 50
合格 1
基本情報:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Mudstone
Material Info 5mm
時間を作る(s) 33
Process Method Filling
Process Material Mudstone
スピード(mm/s) 500
マックスパワー(%) 100
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Blue painted aluminum oxide
Material Info 1mm
時間を作る(s) 20
Process Method Filling
Process Material Blue painted aluminum oxide
Mark Loop 1
スピード(mm/s) 500
マックスパワー(%) 100
Loop distance 0.5mm
Line Distance 0.02mm
Auto rorate angle 10deg
合格 1機械 :B4 20W
110mm lens refocused 1-2 んん
ソフトウェア: エズカド
スピード: 330 また 300
力: 85 また 80
頻度: 55 また 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
時間を作る(分) 15分
設定:
Process Method Filling/picture
Process Material Stainless steel
スピード(mm/s) 300
マックスパワー(%) 50
合格 1
行間 0.054
頻度 25機械:B4 20W
200mm lens refocused 3mm
ソフトウェア:ライトバーン
スピード: 750
力: 60
頻度: 80khz
Lines per inch:0 .02
2 パスする機械:B4 30W
110mm lens with correct focus
ソフトウェア:lightburn
スピード:1000
力: 90
頻度:50khz
Lines per inch: 0.02
Angle:45
400 パスする
Then finishing
スピード: 2000
力: 30
頻度: 100
Lines per inch:0.05
Angle:45機械:B4 30W
200mm lens as a fill
ソフトウェア:lightburn
スピード:1500
力: 50
頻度:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
時間を作る(分) 10
Process Method Image
Process Material Ceramic tile
スピード(mm/s) 1000
マックスパワー(%) 40
合格 1
行間 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
頻度 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
時間を作る(Hour) 5H
設定:
Process Method 3D sliced
Process Material Aluminum plate
スピード(mm/s) 2000
マックスパワー(%) 90
Mode 3D sliced
Interval(んん) 0.0254
Q-Pulse 45
頻度 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
時間を作る(分) 3分
設定:
Process Method ID card
Process Material ID card
スピード(mm/s) 2000
マックスパワー(%) 40
合格 1
行間 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
時間を作る(分) 10-15分
Process Method Line
Process Material Silver board(1mm)
スピード(mm/s) 1000
マックスパワー(%) 90
頻度 40
Q-pulse width 200
合格 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
使用素材
Battery,aluminum sheet
Battery,aluminum sheet
設定:
Process Method Laser Welding
プロセス材料
Battery,aluminum sheet
マックスパワー(%) 100
頻度(KHz) 100
合格 1
ソフトウェア:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
時間を作る(分) 3 分
設定:
Process Material Rusted coin
スピード(mm/s) 1000
マックスパワー(%) 90
Pass Depends on how rusted the material is
行間 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
時間を作る(分) 1 hour
設定:
Process Method Filling
Process Material Slate
スピード(mm/s) 400
マックスパワー(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
時間を作る(s) 58
Process Method Filling
Process Material Stainless steel
スピード(mm/s) 120
マックスパワー(%) 100
合格 1
ソフトウェア: ライトバーン
機械: ComMarker B4 60W-mopa
レーザー出力:620W
使用素材:BRASS
素材情報: COIN
時間を作る(分): 6hr50mins
スピード(mm/s): 2000
頻度(Khz): 100
マックスパワー(%): 90
合格: 512
行間: 0.025
Dot width:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
スピード(mm/s): 2500
頻度(Khz): 200
マックスパワー(%): 90
合格: 1
行間: 0.015
Dot width:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
機械: コムマーカー B4 20W
レーザー出力: 20W
使用素材: BRASS
素材情報: COIN
時間を作る(分): 23MINS
頻度(Khz): 30
マックスパワー(%): 90
合格: 157
行間: 0.02
Dot width:
Hatch Mode:
Q Pulse Width (nm):only for mopa machines
基本情報:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Acrylic
Material Info 3mm
時間を作る(s) 36
Process Method picture
Process Material Acrylic
スピード(mm/s) 500
マックスパワー(%) 50
合格 1
基本情報:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Mudstone
Material Info 5mm
時間を作る(s) 33
Process Method Filling
Process Material Mudstone
スピード(mm/s) 500
マックスパワー(%) 100
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Blue painted aluminum oxide
Material Info 1mm
時間を作る(s) 20
Process Method Filling
Process Material Blue painted aluminum oxide
Mark Loop 1
スピード(mm/s) 500
マックスパワー(%) 100
Loop distance 0.5mm
Line Distance 0.02mm
Auto rorate angle 10deg
合格 1機械 :B4 20W
110mm lens refocused 1-2 んん
ソフトウェア: エズカド
スピード: 330 また 300
力: 85 また 80
頻度: 55 また 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
時間を作る(分) 15分
設定:
Process Method Filling/picture
Process Material Stainless steel
スピード(mm/s) 300
マックスパワー(%) 50
合格 1
行間 0.054
頻度 25機械:B4 20W
200mm lens refocused 3mm
ソフトウェア:ライトバーン
スピード: 750
力: 60
頻度: 80khz
Lines per inch:0 .02
2 パスする機械:B4 30W
110mm lens with correct focus
ソフトウェア:lightburn
スピード:1000
力: 90
頻度:50khz
Lines per inch: 0.02
Angle:45
400 パスする
Then finishing
スピード: 2000
力: 30
頻度: 100
Lines per inch:0.05
Angle:45機械:B4 30W
200mm lens as a fill
ソフトウェア:lightburn
スピード:1500
力: 50
頻度:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
時間を作る(分) 10
Process Method Image
Process Material Ceramic tile
スピード(mm/s) 1000
マックスパワー(%) 40
合格 1
行間 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
頻度 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
時間を作る(Hour) 5H
設定:
Process Method 3D sliced
Process Material Aluminum plate
スピード(mm/s) 2000
マックスパワー(%) 90
Mode 3D sliced
Interval(んん) 0.0254
Q-Pulse 45
頻度 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
時間を作る(分) 3分
設定:
Process Method ID card
Process Material ID card
スピード(mm/s) 2000
マックスパワー(%) 40
合格 1
行間 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
時間を作る(分) 10-15分
Process Method Line
Process Material Silver board(1mm)
スピード(mm/s) 1000
マックスパワー(%) 90
頻度 40
Q-pulse width 200
合格 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
使用素材
Battery,aluminum sheet
Battery,aluminum sheet
設定:
Process Method Laser Welding
プロセス材料
Battery,aluminum sheet
マックスパワー(%) 100
頻度(KHz) 100
合格 1
ソフトウェア:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
時間を作る(分) 3 分
設定:
Process Material Rusted coin
スピード(mm/s) 1000
マックスパワー(%) 90
Pass Depends on how rusted the material is
行間 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
時間を作る(分) 1 hour
設定:
Process Method Filling
Process Material Slate
スピード(mm/s) 400
マックスパワー(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
時間を作る(s) 58
Process Method Filling
Process Material Stainless steel
スピード(mm/s) 120
マックスパワー(%) 100
合格 1
ソフトウェア: ライトバーン
機械: ComMarker B4 60W-mopa
レーザー出力:620W
使用素材:BRASS
素材情報: COIN
時間を作る(分): 6hr50mins
スピード(mm/s): 2000
頻度(Khz): 100
マックスパワー(%): 90
合格: 512
行間: 0.025
Dot width:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
スピード(mm/s): 2500
頻度(Khz): 200
マックスパワー(%): 90
合格: 1
行間: 0.015
Dot width:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
機械: コムマーカー B4 20W
レーザー出力: 20W
使用素材: BRASS
素材情報: COIN
時間を作る(分): 23MINS
頻度(Khz): 30
マックスパワー(%): 90
合格: 157
行間: 0.02
Dot width:
Hatch Mode:
Q Pulse Width (nm):only for mopa machines
基本情報:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Acrylic
Material Info 3mm
時間を作る(s) 36
Process Method picture
Process Material Acrylic
スピード(mm/s) 500
マックスパワー(%) 50
合格 1
基本情報:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Mudstone
Material Info 5mm
時間を作る(s) 33
Process Method Filling
Process Material Mudstone
スピード(mm/s) 500
マックスパワー(%) 100
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Blue painted aluminum oxide
Material Info 1mm
時間を作る(s) 20
Process Method Filling
Process Material Blue painted aluminum oxide
Mark Loop 1
スピード(mm/s) 500
マックスパワー(%) 100
Loop distance 0.5mm
Line Distance 0.02mm
Auto rorate angle 10deg
合格 1