Material Settings for ComMarker Machines
컴마커 레이저 조각사 and markers can engrave and cut a huge variety of materials, from something as slim as tissue paper to something as thick as leather and wood panels. The only limitation may be your imagination.
These laser parameters have been tested mostly with our ComMarker laser engraver, but they can also be applied to other power laser sources in the market. Understand that the result on your material can be different from the result shown in the videos. That happens for various factors such as other material components, different power laser source quality, a different lens, 등.
기본 정보: 환경: 기본 정보: 기본 정보: 기본 정보: 환경: 기본 정보: 재료 정보 시간 만들기(에스) 30에스 속도(밀리미터/초) 25 기본 정보: 기계:ComMarker B4 Mopa 레이저 모듈 출력 전력:60승 사용된 재료:PCD 재료 정보:PCD board 시간 만들기(분):30에스 환경: For filling only 가공방법:충전재 공정 재료:PCD board 속도(밀리미터/초):2000 최대 전력(%):60 Pass:6 Line space:0.03 기본 정보: For filling only: Process Method Hatching 기본 정보: 기본 정보: For filling only: 기본 정보: Engraving Setting: Clean Setting: 기본 정보: 소프트웨어: EZCAD2 환경: 속도(밀리미터/초): 1000 For filling only: For filling only: Pass 1 Software Ezcad For filling only:
기본 정보: 환경: 기본 정보: 기본 정보: 기본 정보: 환경: 기본 정보: 재료 정보 시간 만들기(에스) 30에스 속도(밀리미터/초) 25 기본 정보: 기계:ComMarker B4 Mopa 레이저 모듈 출력 전력:60승 사용된 재료:PCD 재료 정보:PCD board 시간 만들기(분):30에스 환경: For filling only 가공방법:충전재 공정 재료:PCD board 속도(밀리미터/초):2000 최대 전력(%):60 Pass:6 Line space:0.03 기본 정보: For filling only: Process Method Hatching 기본 정보: 기본 정보: For filling only: 기본 정보: Engraving Setting: Clean Setting: 기본 정보: 소프트웨어: EZCAD2 환경: 속도(밀리미터/초): 1000 For filling only: For filling only: Pass 1 Software Ezcad For filling only:
기본 정보: 환경: 기본 정보: 기본 정보: 기본 정보: 환경: 기본 정보: 재료 정보 시간 만들기(에스) 30에스 속도(밀리미터/초) 25 기본 정보: 기계:ComMarker B4 Mopa 레이저 모듈 출력 전력:60승 사용된 재료:PCD 재료 정보:PCD board 시간 만들기(분):30에스 환경: For filling only 가공방법:충전재 공정 재료:PCD board 속도(밀리미터/초):2000 최대 전력(%):60 Pass:6 Line space:0.03 기본 정보: For filling only: Process Method Hatching 기본 정보: 기본 정보: For filling only: 기본 정보: Engraving Setting: Clean Setting: 기본 정보: 소프트웨어: EZCAD2 환경: 속도(밀리미터/초): 1000 For filling only: For filling only: Pass 1 Software Ezcad For filling only: 기계 :B4 20W
110mm lens refocused 1-2 mm
소프트웨어: 에스카드
속도: 330 또는 300
힘: 85 또는 80
Frequency: 55 또는 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
시간 만들기(분) 15분
환경:
Process Method Filling/picture
Process Material Stainless steel
속도(밀리미터/초) 300
최대 전력(%) 50
Pass 1
Line space 0.054
Frequency 25기계:B4 20W
200mm lens refocused 3mm
소프트웨어:라이트번
속도: 750
힘: 60
빈도: 80khz
Lines per inch:0 .02
2 passes기계:B4 30W
110mm lens with correct focus
소프트웨어:lightburn
속도:1000
힘: 90
빈도:50khz
Lines per inch: 0.02
Angle:45
400 passes
Then finishing
속도: 2000
힘: 30
Frequency: 100
Lines per inch:0.05
Angle:45기계:B4 30W
200mm lens as a fill
소프트웨어:lightburn
속도:1500
힘: 50
빈도:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
시간 만들기(분) 10
Process Method Image
Process Material Ceramic tile
속도(밀리미터/초) 1000
최대 전력(%) 40
Pass 1
Line space 0.05
Dot width Enable
도트 폭 0.06
Mode Jarvis
Frequency 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
시간 만들기(Hour) 5H
환경:
Process Method 3D sliced
Process Material Aluminum plate
속도(밀리미터/초) 2000
최대 전력(%) 90
Mode 3D sliced
간격(mm) 0.0254
Q-Pulse 45
Frequency 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
시간 만들기(분) 3분
환경:
Process Method ID card
Process Material ID card
속도(밀리미터/초) 2000
최대 전력(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
시간 만들기(분) 10-15분
Process Method Line
Process Material Silver board(1mm)
속도(밀리미터/초) 1000
최대 전력(%) 90
Frequency 40
Q-pulse width 200
Pass 1
Wobble Enable
지름 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
사용된 재료
Battery,aluminum sheet
Battery,aluminum sheet
환경:
Process Method Laser Welding
공정 재료
Battery,aluminum sheet
최대 전력(%) 100
Frequency(KHz) 100
Pass 1
소프트웨어:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
시간 만들기(분) 3 분
환경:
Process Material Rusted coin
속도(밀리미터/초) 1000
최대 전력(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
시간 만들기(분) 1 시간
환경:
Process Method Filling
Process Material Slate
속도(밀리미터/초) 400
최대 전력(%) 100
Mode 3D Sliced
간격 0.04
도트 폭 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
시간 만들기(에스) 58
Process Method Filling
Process Material Stainless steel
속도(밀리미터/초) 120
최대 전력(%) 100
Pass 1
소프트웨어: 라이트번
기계: ComMarker B4 60W-mopa
Laser Power:620승
사용된 재료:BRASS
재료 정보: COIN
시간 만들기(분): 6hr50mins
속도(밀리미터/초): 2000
Frequency(Khz): 100
최대 전력(%): 90
Pass: 512
Line space: 0.025
도트 폭:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
속도(밀리미터/초): 2500
Frequency(Khz): 200
최대 전력(%): 90
Pass: 1
Line space: 0.015
도트 폭:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
기계: 컴마커 B4 20W
Laser Power: 20승
사용된 재료: BRASS
재료 정보: COIN
시간 만들기(분): 23MINS
Frequency(Khz): 30
최대 전력(%): 90
Pass: 157
Line space: 0.02
도트 폭:
Hatch Mode:
Q Pulse Width (nm):only for mopa machines
기본 정보:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Acrylic
Material Info 3mm
시간 만들기(에스) 36
Process Method picture
Process Material Acrylic
속도(밀리미터/초) 500
최대 전력(%) 50
Pass 1
기본 정보:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Mudstone
Material Info 5mm
시간 만들기(에스) 33
Process Method Filling
Process Material Mudstone
속도(밀리미터/초) 500
최대 전력(%) 100
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Blue painted aluminum oxide
Material Info 1mm
시간 만들기(에스) 20
Process Method Filling
Process Material Blue painted aluminum oxide
Mark Loop 1
속도(밀리미터/초) 500
최대 전력(%) 100
Loop distance 0.5mm
Line Distance 0.02mm
Auto rorate angle 10deg
Pass 1기계 :B4 20W
110mm lens refocused 1-2 mm
소프트웨어: 에스카드
속도: 330 또는 300
힘: 85 또는 80
Frequency: 55 또는 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
시간 만들기(분) 15분
환경:
Process Method Filling/picture
Process Material Stainless steel
속도(밀리미터/초) 300
최대 전력(%) 50
Pass 1
Line space 0.054
Frequency 25기계:B4 20W
200mm lens refocused 3mm
소프트웨어:라이트번
속도: 750
힘: 60
빈도: 80khz
Lines per inch:0 .02
2 passes기계:B4 30W
110mm lens with correct focus
소프트웨어:lightburn
속도:1000
힘: 90
빈도:50khz
Lines per inch: 0.02
Angle:45
400 passes
Then finishing
속도: 2000
힘: 30
Frequency: 100
Lines per inch:0.05
Angle:45기계:B4 30W
200mm lens as a fill
소프트웨어:lightburn
속도:1500
힘: 50
빈도:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
시간 만들기(분) 10
Process Method Image
Process Material Ceramic tile
속도(밀리미터/초) 1000
최대 전력(%) 40
Pass 1
Line space 0.05
Dot width Enable
도트 폭 0.06
Mode Jarvis
Frequency 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
시간 만들기(Hour) 5H
환경:
Process Method 3D sliced
Process Material Aluminum plate
속도(밀리미터/초) 2000
최대 전력(%) 90
Mode 3D sliced
간격(mm) 0.0254
Q-Pulse 45
Frequency 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
시간 만들기(분) 3분
환경:
Process Method ID card
Process Material ID card
속도(밀리미터/초) 2000
최대 전력(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
시간 만들기(분) 10-15분
Process Method Line
Process Material Silver board(1mm)
속도(밀리미터/초) 1000
최대 전력(%) 90
Frequency 40
Q-pulse width 200
Pass 1
Wobble Enable
지름 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
사용된 재료
Battery,aluminum sheet
Battery,aluminum sheet
환경:
Process Method Laser Welding
공정 재료
Battery,aluminum sheet
최대 전력(%) 100
Frequency(KHz) 100
Pass 1
소프트웨어:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
시간 만들기(분) 3 분
환경:
Process Material Rusted coin
속도(밀리미터/초) 1000
최대 전력(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
시간 만들기(분) 1 시간
환경:
Process Method Filling
Process Material Slate
속도(밀리미터/초) 400
최대 전력(%) 100
Mode 3D Sliced
간격 0.04
도트 폭 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
시간 만들기(에스) 58
Process Method Filling
Process Material Stainless steel
속도(밀리미터/초) 120
최대 전력(%) 100
Pass 1
소프트웨어: 라이트번
기계: ComMarker B4 60W-mopa
Laser Power:620승
사용된 재료:BRASS
재료 정보: COIN
시간 만들기(분): 6hr50mins
속도(밀리미터/초): 2000
Frequency(Khz): 100
최대 전력(%): 90
Pass: 512
Line space: 0.025
도트 폭:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
속도(밀리미터/초): 2500
Frequency(Khz): 200
최대 전력(%): 90
Pass: 1
Line space: 0.015
도트 폭:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
기계: 컴마커 B4 20W
Laser Power: 20승
사용된 재료: BRASS
재료 정보: COIN
시간 만들기(분): 23MINS
Frequency(Khz): 30
최대 전력(%): 90
Pass: 157
Line space: 0.02
도트 폭:
Hatch Mode:
Q Pulse Width (nm):only for mopa machines
기본 정보:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Acrylic
Material Info 3mm
시간 만들기(에스) 36
Process Method picture
Process Material Acrylic
속도(밀리미터/초) 500
최대 전력(%) 50
Pass 1
기본 정보:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Mudstone
Material Info 5mm
시간 만들기(에스) 33
Process Method Filling
Process Material Mudstone
속도(밀리미터/초) 500
최대 전력(%) 100
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Blue painted aluminum oxide
Material Info 1mm
시간 만들기(에스) 20
Process Method Filling
Process Material Blue painted aluminum oxide
Mark Loop 1
속도(밀리미터/초) 500
최대 전력(%) 100
Loop distance 0.5mm
Line Distance 0.02mm
Auto rorate angle 10deg
Pass 1기계 :B4 20W
110mm lens refocused 1-2 mm
소프트웨어: 에스카드
속도: 330 또는 300
힘: 85 또는 80
Frequency: 55 또는 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
시간 만들기(분) 15분
환경:
Process Method Filling/picture
Process Material Stainless steel
속도(밀리미터/초) 300
최대 전력(%) 50
Pass 1
Line space 0.054
Frequency 25기계:B4 20W
200mm lens refocused 3mm
소프트웨어:라이트번
속도: 750
힘: 60
빈도: 80khz
Lines per inch:0 .02
2 passes기계:B4 30W
110mm lens with correct focus
소프트웨어:lightburn
속도:1000
힘: 90
빈도:50khz
Lines per inch: 0.02
Angle:45
400 passes
Then finishing
속도: 2000
힘: 30
Frequency: 100
Lines per inch:0.05
Angle:45기계:B4 30W
200mm lens as a fill
소프트웨어:lightburn
속도:1500
힘: 50
빈도:20khz
Lines per inch: 0.025
Angle:45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
시간 만들기(분) 10
Process Method Image
Process Material Ceramic tile
속도(밀리미터/초) 1000
최대 전력(%) 40
Pass 1
Line space 0.05
Dot width Enable
도트 폭 0.06
Mode Jarvis
Frequency 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
시간 만들기(Hour) 5H
환경:
Process Method 3D sliced
Process Material Aluminum plate
속도(밀리미터/초) 2000
최대 전력(%) 90
Mode 3D sliced
간격(mm) 0.0254
Q-Pulse 45
Frequency 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
시간 만들기(분) 3분
환경:
Process Method ID card
Process Material ID card
속도(밀리미터/초) 2000
최대 전력(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board(1mm)
시간 만들기(분) 10-15분
Process Method Line
Process Material Silver board(1mm)
속도(밀리미터/초) 1000
최대 전력(%) 90
Frequency 40
Q-pulse width 200
Pass 1
Wobble Enable
지름 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
사용된 재료
Battery,aluminum sheet
Battery,aluminum sheet
환경:
Process Method Laser Welding
공정 재료
Battery,aluminum sheet
최대 전력(%) 100
Frequency(KHz) 100
Pass 1
소프트웨어:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
시간 만들기(분) 3 분
환경:
Process Material Rusted coin
속도(밀리미터/초) 1000
최대 전력(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
시간 만들기(분) 1 시간
환경:
Process Method Filling
Process Material Slate
속도(밀리미터/초) 400
최대 전력(%) 100
Mode 3D Sliced
간격 0.04
도트 폭 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
시간 만들기(에스) 58
Process Method Filling
Process Material Stainless steel
속도(밀리미터/초) 120
최대 전력(%) 100
Pass 1
소프트웨어: 라이트번
기계: ComMarker B4 60W-mopa
Laser Power:620승
사용된 재료:BRASS
재료 정보: COIN
시간 만들기(분): 6hr50mins
속도(밀리미터/초): 2000
Frequency(Khz): 100
최대 전력(%): 90
Pass: 512
Line space: 0.025
도트 폭:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
속도(밀리미터/초): 2500
Frequency(Khz): 200
최대 전력(%): 90
Pass: 1
Line space: 0.015
도트 폭:
Hatch Mode: 45°
Q Pulse Width (nm):only for mopa machines 200
기계: 컴마커 B4 20W
Laser Power: 20승
사용된 재료: BRASS
재료 정보: COIN
시간 만들기(분): 23MINS
Frequency(Khz): 30
최대 전력(%): 90
Pass: 157
Line space: 0.02
도트 폭:
Hatch Mode:
Q Pulse Width (nm):only for mopa machines
기본 정보:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Acrylic
Material Info 3mm
시간 만들기(에스) 36
Process Method picture
Process Material Acrylic
속도(밀리미터/초) 500
최대 전력(%) 50
Pass 1
기본 정보:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Mudstone
Material Info 5mm
시간 만들기(에스) 33
Process Method Filling
Process Material Mudstone
속도(밀리미터/초) 500
최대 전력(%) 100
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Blue painted aluminum oxide
Material Info 1mm
시간 만들기(에스) 20
Process Method Filling
Process Material Blue painted aluminum oxide
Mark Loop 1
속도(밀리미터/초) 500
최대 전력(%) 100
Loop distance 0.5mm
Line Distance 0.02mm
Auto rorate angle 10deg
Pass 1