블로그

단계별 가이드: Commarker Omni 설정 1 for Stainless Steel Engraving

Stainless Steel Engraving

1. 소개

Stainless steel is a challenging material to engrave, but with the right setup, your ComMarker Omni 1 can deliver micron-level precision and clean, high-contrast markings. Proper calibration and parameter adjustments are key to preventing engraving burns and achieving durable, professional-quality results. This guide is designed for users of all experience levels, offering a step-by-step tutorial for effective stainless steel marking using your laser engraver.


image 53

2. Unpacking and Initial Setup

2.1 Unboxing Your ComMarker Omni 1

  • Carefully Unpack: Remove the machine and all components from the packaging. Verify that all parts listed in the user manual are present.
  • Inspect for Damage: Check for any shipping damage. If any parts are damaged, contact customer support immediately.

2.2 Workspace Preparation and Safety Precautions

  • Clean, 안정적인 표면: Place the Omni 1 on a sturdy, level table. Ensure the work area is free from dust and vibrations.
  • Proper Ventilation: Ensure your workspace is well-ventilated to dissipate heat and fumes.
  • 안전 장비: Always wear certified laser safety goggles when operating the machine.
  • Electrical Requirements: Verify that your power supply meets the specified voltage (110–130V or 200–240V) and ensure proper grounding.

image 54

3. Mechanical Assembly and Calibration

3.1 Assembling the Components

Follow the instructions in the user manual for assembling the ComMarker Omni 1:

  • 단계 1: Lay out all parts and tools.
  • 단계 2: Secure the supporting poles and attach the laser head to the designated shelf.
  • 단계 3: Connect the necessary cables (검류계, 힘, and data cables) as per the diagram.
  • 단계 4: Connect the water chiller if applicable, ensuring all tubes are securely attached and leak-free.

3.2 Initial Calibration of the Laser Head and Focus

Achieving proper focus is essential for stainless steel engraving:

  • Dual Red-Light Focus: Activate the laser’s dual red-light system. Adjust the laser head until the two red spots overlap perfectly on a calibration target.
  • Lock Focus Settings: Once the optimal focus is reached, secure the laser head to prevent movement during operation.
  • Test Calibration: Run a quick test pattern on a sample material to confirm that the focus is accurate.

image 55

4. Connecting and Configuring Software

4.1 Installing EZCad2/LightBurn

  • Download and Install: Obtain the latest version of EZCad2 or LightBurn from the official website. Follow the installation instructions carefully.
  • Driver Setup: Ensure that the necessary drivers for the Omni 1 are installed on your computer.
  • 소프트웨어 구성: Open the software and connect it to your laser engraver via USB or Wi-Fi.

4.2 Importing Calibration Files and Setting Up Your Workspace

  • 교정 파일 가져오기: Use the built-in calibration feature in your software. Import the calibration file provided in the user manual.
  • 작업공간 설정: Adjust the working area in the software to match the physical dimensions of your laser engraver.
  • Test Run: Perform a calibration test to verify that the software and hardware are properly synchronized.

image 56

5. Optimizing Laser Parameters for Stainless Steel Engraving

5.1 Recommended Settings Overview

For stainless steel marking, precise settings are essential to avoid overheating and ensure clean, 영구 조각. For the ComMarker Omni 1:

  • 조각 속도: 1000 밀리미터/초
  • 레이저 주파수: 30 kHz
  • 레이저 파워: 75%
  • 라인 간격: 0.025 mm
  • DPI: 1000
  • 조각 각도: 45°
  • 패스: 100

5.2 Adjusting Power, 속도, and Frequency

  • Laser Power Adjustment:
    • Start at 75% power for stainless steel.
    • Monitor the engraving; if excessive burn marks appear, lower the power incrementally.
  • Speed and Frequency:
    • Set speed to 1000 mm/sec for efficient marking.
    • Use a frequency of 30 kHz to balance speed with precision.
  • 미세 조정:
    • Experiment with slight adjustments and document the outcomes.
    • Use LightBurn’s preview mode to visualize how changes affect the engraving depth and detail.

1742195159392

6. Test Engraving and Fine-Tuning

6.1 Running a Test Pattern

  • Select a Standard Test Pattern:
    • Choose a test design that includes various details such as fine lines, gradients, and text.
  • Engrave on a Sample Piece:
    • Use stainless steel offcuts to run your test pattern.
  • 결과를 평가하십시오:
    • Check for uniformity, clarity, 그리고 깊이.
    • Note any areas with burns or uneven engraving.

6.2 Analyzing Results and Making Adjustments

  • Identify Issues:
    • Look for signs of overburning or carbonization.
    • Check for inconsistent line spacing or incomplete engraving.
  • Parameter Tweaks:
    • 레이저 출력 조정, 속도, or frequency based on the observed issues.
    • Re-run the test pattern until the engraving meets the desired quality.
  • Document Successful Settings:
    • Save the settings profile in LightBurn for future projects.

image 57

7. 일반적인 문제 해결

7.1 Calibration and Focus Problems

  • 문제: Laser not properly focused
    해결책: Revisit the dual red-light focus system. Adjust slowly until the red lights converge accurately on your calibration target.

7.2 일관성없는 조각 깊이

  • 문제: Variation in engraving depth across the test pattern
    해결책: Check and re-align the galvanometer mirrors. Verify that the laser power remains stable throughout the process.

7.3 Overheating and Carbonization

  • 문제: Signs of burning or carbon buildup on stainless steel
    해결책: Lower the laser power slightly and increase the frequency. Ensure the cooling system is functioning correctly.

7.4 Software-Related Issues

  • 문제: LightBurn preview does not match the final engraving
    해결책: Re-import calibration files and adjust the offset and angle parameters as needed. Check for software updates that may resolve the discrepancy.

image 58

8. Best Practices and Pro Tips

8.1 Establish a Routine Calibration Schedule

  • Daily: Quick focus check using the dual red-light system.
  • Weekly: Run a comprehensive calibration test using a standard test pattern.
  • Monthly: Review and document your settings to detect any drift in performance.

8.2 Optimize Your Environment

  • Temperature: Maintain a consistent room temperature (ideally between 10°C and 28°C).
  • 통풍: Ensure proper airflow around the machine to dissipate heat effectively.
  • Stable Setup: Position the engraver on a vibration-free surface to maintain calibration accuracy.

8.3 Documentation and Continuous Improvement

  • Calibration Log: Keep detailed records of your settings and test results.
  • Review and Adjust: Regularly analyze your log for trends and make proactive adjustments.
  • Community Engagement: Join forums and subscribe to newsletters for the latest tips and software updates.

컴마커 옴니 1 레이저 조각사

$4,499 $3,999 구하다:$500

모든 재료를 잠금해제하는 차세대 레이저. ZeroBurn™ 조각 기술 세계 최초의 16K HD 레이저 조각기 10,000mm/s SpeedMax™ 조각 시스템 UV 레이저로 모든 재료 잠금 해제 ColdFront™ 열 기술 전기 리프팅 2 EZCAD 및 LightBurn 360°회전 조각 시스템과 호환되는 옵션 렌즈

110V
220V
5승
10승
20241121131039
옴니 1 기본 번들
20241121131004
옴니 1 로타리 번들
20241121131044
옴니 1 얼티밋 번들

9. 최종 생각

Achieving micron-level accuracy in stainless steel engraving is not just a technical requirement—it’s a competitive necessity. With this comprehensive, step-by-step guide on setting up your ComMarker Omni 1, you now have the tools and knowledge to achieve 0.001mm precision every time. Embrace these calibration techniques, maintain a disciplined routine, and watch as your engraving quality and productivity soar.

For any further questions or personalized support, 방문하시기 바랍니다 ComMarker.com or email us at [email protected]. Unlock the full potential of your laser engraver today and set a new standard for precision and quality in stainless steel marking.

에 대한 데이비드 리

안녕하세요, 저는 데이빗 리예요, 저는 풍부한 경험과 폭넓은 지식을 갖춘 열정적이고 창의적인 상업용 레이저 조각사이자 마킹 전문가입니다.. 과거에 10 연령, 저는 다양한 상업 프로젝트를 위한 레이저 조각기와 마킹 솔루션에 집중해 왔습니다. 저는 새로운 기술과 디자인 트렌드에 민감합니다. ,최고의 레이저 조각사 및 마킹 경험을 끊임없이 추구합니다.

답장을 남겨주세요