Laser engraving golf clubs combines precision, 내구성, and personalization—transforming standard clubs into unique, high-end gear. 파이버 레이저, especially MOPA (마스터 발진기 전력 증폭기) 디자인, excel at marking stainless steel, 티탄, and other alloys used in club heads and shafts. For the most reliable results, 그만큼 컴마커 line of 섬유 레이저 조각기 stands out. Whether you’re adding names and logos or deep texturing for grip and aesthetics, 그만큼 ComMarker B6 JPT MOPA 그리고 컴마커 타이탄 1 JPT MOPA deliver industry-leading performance, 속도, and color-marking capabilities.
Why Laser Engraving for Golf Clubs?
Laser engraving has become the go-to method for golf club customization thanks to its:
- 정도 & 세부 사항: Fiber lasers achieve micron-level accuracy, ideal for fine logos, 일련번호, 또는 장식 패턴.
- 내구성: Engraved markings resist wear, UV exposure, and corrosion—critical for clubs subjected to repeated impacts and the elements.
- 다재: Fiber lasers can mark a range of metals—stainless steel, 티탄, 놋쇠, and more—without changing hardware .
- 속도: High scanning speeds up to 10,000–15,000 mm/s streamline production, from single-club personalization to small batch orders.
Golf club engraving not only elevates aesthetics but also enhances traceability for custom builds and high-end brands.
섬유 대. 기타 레이저 유형
CO₂ 레이저
- Best for non-metal substrates like wood and acrylic.
- Require marking sprays for metals, leading to extra prep time.
다이오드 레이저
- Affordable and compact, but limited in power (≤5 W) and struggle with reflective metals.
파이버 레이저 (MOPA)
- Ideal for metals due to high absorption at 1064 nm.
- MOPA architecture allows adjustable pulse width for color marking and minimized heat-affected zones.
Choosing the Best Fiber Laser: Key Factors
- 레이저 파워: Clubs typically require 20–100 W. 낮은 전력 (20 승) suffices for surface marking; higher power (60–200 W) enables deeper engraving and color marking.
- Pulse Control: MOPA systems let you tune pulse width/frequency for bright colors and contrast on stainless steel.
- Scan Speed: Look for galvanometer-driven heads rated 10,000–15,000 mm/s to maintain throughput on multiple clubs.
- 작업 영역 & Fixtures: Ensure the engraving field covers typical club head sizes (100–150 mm) and offers rotary or tilt fixtures for shafts.
- Software Ecosystem: Compatibility with LightBurn or EZCad2 provides flexible design import (DXF, SVG), preview modes, and batch processing.
ComMarker 파이버 레이저 조각기: Top Picks
1. ComMarker B6 JPT MOPA 파이버 레이저 조각기
힘: 20 W JPT MOPA
작업 영역: 150 × 150 mm
Scan Speed: 최대 15,000 밀리미터/초
Key Benefits:
- Micro-detail Engraving: Perfect for small logos, 일련번호, and intricate patterns on club heads.
- Compact Footprint: Desktop-friendly for pro-shops and small workshops.
- 컬러 마킹: Fine pulse control enables limited color marking on coated alloys.
2. 컴마커 타이탄 1 JPT MOPA 파이버 레이저 조각사
힘: 60 W–200 W JPT MOPA
작업 영역: 300 × 300 mm (optional extended)
Scan Speed: 최대 15,000 밀리미터/초
Key Benefits:
- 깊은 조각 & 절단: 60 W+ power cuts thin steel or deeply etches logos in a single pass.
- Vibrant Color Marking: Adjustable pulses produce black, 빨간색, yellow, 파란색, and white marks on stainless steel.
- 로타리 부착물: 360° engraving for full-around shaft customizations.
- Industrial Reliability: 수업 1 안전, robust cooling, and high-duty cycle for continuous operation.
Golf Club Engraving Workflow
- Design Preparation
- Use CAD/vector software (코렐드로우, 어도비 일러스트레이터) to create or import club logos, 이름, 또는 패턴.
- Save as SVG, DXF, or AI for LightBurn/EZCad2.
- 재료 & Fixture Setup
- Clean club heads with isopropyl alcohol; apply laser marking spray if needed.
- Secure clubs in a rotary or tilt fixture to ensure consistent focus.
- Laser Parameter Selection
- 20 W B6: 100% 힘, 30–50 kHz, speed 500–1000 mm/s for stainless steel marking.
- 타이탄 1: 60–100% power, 20–50 kHz, speed 1000–5000 mm/s for deep etch or color marking.
- Preview & Test
- Use the software preview mode and “air run” to verify positioning.
- Perform a test mark on scrap metal to fine-tune settings.
- Production Run
- Start engraving; monitor the process to ensure clean marks.
- For multi-color effects, adjust pulse width between passes.
- 후처리
- Clean engraved areas with a soft brush.
- Apply protective clear coat or oil to prevent corrosion.
유지 & Safety Tips
- 렌즈 & Mirror Cleaning: Use lens paper and isopropyl alcohol weekly to maintain beam quality.
- Eye & Skin Protection: Always wear wavelength-specific laser safety glasses and gloves.
- 통풍: Ensure fume extraction when marking coated or painted club heads.
ComMarker B6 JPT MOPA 파이버 레이저 조각기
스마트 컬러 조각 시대에 오신 것을 환영합니다. 레코드 브레이크 소형 크기 색상 표시 능력 슈퍼 3D 조각 & 절단 능력 2-in-1 디자인 자동 초점 기술 15,000mm/s speedmax ™ 조각 8K HD 정확도 스마트 LED 터치 스크린
을 위한 Golf Club Laser Engraving, nothing matches the precision, 속도, and versatility of ComMarker’s MOPA fiber lasers. 그만큼 20 W B6 excels at fine detail and small-batch customizations, 동안 60–200 W Titan 1 tackles deeper etching, 컬러 마킹, and high-volume production. Evaluate your personalization needs, 재료 두께, and throughput requirements to choose the perfect ComMarker model—then get ready to launch a truly premium, customized golf club engraving service that stands out on and off the green.
