Introdução:
We found that many of our friends urge us to try something interesting. So we are here to give you some inspiration for different kinds of gravadores a laser‘ usa.
Today we bring the method of 2.5D laser engraving, and we hope you may like it. If you are also into 2.5D laser engraving, keep reading this article.
Actually, the picture for 2.5D laser engraving needs to be converted from STL, but some of the black and white are already converted and can be used directly in Lightburn.
Informação básica:
| Programas | Queimadura de luz |
| Máquina | ComMarker B4 JPT Laser de fibra MOPA Máquina de marcação |
| Potência de saída do módulo laser | 30C |
| Material usado | Ardósia |
| Informações materiais | 5mm slate |
| Fazendo tempo(minutos) | 1 hour |
Contexto:
| Método de Processo | Enchimento |
| Material de Processo | Ardósia |
| Velocidade(mm/s) | 400 |
| Poder maximo(%) | 100 |
| Mode | 3D Sliced |
| Interval | 0.04 |
| Dot width | 0.04 |
Instrução:
Step1
Test the material you want to laser engrave for the suitable parameter to achieve the effect you want.
Step2
Input the picture.
Step3
Set the parameter.
Step4
Permaneça paciente, and your work will be finished within a few hours.
Arquivos de projeto:
Download
