Laser engraving golf clubs combines precision, долговечность, and personalization—transforming standard clubs into unique, high-end gear. Волоконные лазеры, especially MOPA (Усилитель мощности задающего генератора) дизайн, excel at marking stainless steel, титан, and other alloys used in club heads and shafts. For the most reliable results, тот ComMarker line of волоконные лазерные граверы stands out. Whether you’re adding names and logos or deep texturing for grip and aesthetics, тот ComMarker B6 JPT MOPA и КомМаркер Титан 1 JPT МОПА deliver industry-leading performance, скорость, and color-marking capabilities.
Why Laser Engraving for Golf Clubs?
Laser engraving has become the go-to method for golf club customization thanks to its:
- Точность & Деталь: Fiber lasers achieve micron-level accuracy, ideal for fine logos, серийные номера, or decorative patterns.
- Долговечность: Engraved markings resist wear, UV exposure, and corrosion—critical for clubs subjected to repeated impacts and the elements.
- Универсальность: Fiber lasers can mark a range of metals—stainless steel, титан, латунь, and more—without changing hardware .
- Скорость: High scanning speeds up to 10,000–15,000 mm/s streamline production, from single-club personalization to small batch orders.
Golf club engraving not only elevates aesthetics but also enhances traceability for custom builds and high-end brands.
Волокно против. Другие типы лазеров
CO₂-лазеры
- Best for non-metal substrates like wood and acrylic.
- Require marking sprays for metals, leading to extra prep time.
Диодные лазеры
- Affordable and compact, but limited in power (≤5 W) and struggle with reflective metals.
Волоконные лазеры (МОПА)
- Ideal for metals due to high absorption at 1064 нм.
- MOPA architecture allows adjustable pulse width for color marking and minimized heat-affected zones.
Choosing the Best Fiber Laser: Key Factors
- Мощность лазера: Clubs typically require 20–100 W. Меньшая мощность (20 Вт) suffices for surface marking; higher power (60–200 W) enables deeper engraving and color marking.
- Pulse Control: MOPA systems let you tune pulse width/frequency for bright colors and contrast on stainless steel.
- Scan Speed: Look for galvanometer-driven heads rated 10,000–15,000 mm/s to maintain throughput on multiple clubs.
- Рабочая зона & Fixtures: Ensure the engraving field covers typical club head sizes (100–150 mm) and offers rotary or tilt fixtures for shafts.
- Software Ecosystem: Compatibility with LightBurn or EZCad2 provides flexible design import (DXF-формат, SVG), preview modes, and batch processing.
Волоконные лазерные граверы ComMarker: Top Picks
1. Волоконный лазерный гравер ComMarker B6 JPT MOPA
Власть: 20 W JPT MOPA
Рабочая зона: 150 × 150 мм
Scan Speed: вплоть до 15,000 мм/с
Key Benefits:
- Micro-detail Engraving: Perfect for small logos, серийные номера, and intricate patterns on club heads.
- Compact Footprint: Desktop-friendly for pro-shops and small workshops.
- Цветовая маркировка: Fine pulse control enables limited color marking on coated alloys.
2. КомМаркер Титан 1 Волоконный лазерный гравер JPT MOPA
Власть: 60 W–200 W JPT MOPA
Рабочая зона: 300 × 300 мм (optional extended)
Scan Speed: вплоть до 15,000 мм/с
Key Benefits:
- Глубокая гравировка & Резка: 60 W+ power cuts thin steel or deeply etches logos in a single pass.
- Vibrant Color Marking: Adjustable pulses produce black, красный, yellow, синий, and white marks on stainless steel.
- Поворотное приспособление: 360° engraving for full-around shaft customizations.
- Industrial Reliability: Сорт 1 безопасность, robust cooling, and high-duty cycle for continuous operation.
Golf Club Engraving Workflow
- Design Preparation
- Use CAD/vector software (CorelDRAW, Adobe Illustrator) to create or import club logos, имена, или узоры.
- Save as SVG, DXF-формат, or AI for LightBurn/EZCad2.
- Материал & Fixture Setup
- Clean club heads with isopropyl alcohol; apply laser marking spray if needed.
- Secure clubs in a rotary or tilt fixture to ensure consistent focus.
- Laser Parameter Selection
- 20 W B6: 100% власть, 30–50 kHz, speed 500–1000 mm/s for stainless steel marking.
- Титан 1: 60–100% power, 20–50 kHz, speed 1000–5000 mm/s for deep etch or color marking.
- Preview & Test
- Use the software preview mode and “air run” to verify positioning.
- Perform a test mark on scrap metal to fine-tune settings.
- Production Run
- Start engraving; monitor the process to ensure clean marks.
- For multi-color effects, adjust pulse width between passes.
- Постобработка
- Clean engraved areas with a soft brush.
- Apply protective clear coat or oil to prevent corrosion.
Обслуживание & Safety Tips
- Объектив & Mirror Cleaning: Use lens paper and isopropyl alcohol weekly to maintain beam quality.
- Eye & Skin Protection: Always wear wavelength-specific laser safety glasses and gloves.
- Вентиляция: Ensure fume extraction when marking coated or painted club heads.
Волоконный лазерный гравер ComMarker B6 JPT MOPA
Добро пожаловать в эпоху умной цветной гравировки. Рекордный компактный размер Возможность цветовой маркировки Супер 3D гравировка & Режущая способность Конструкция «2 в 1» Технология автофокусировки Скорость гравировки SpeedMax™ 15 000 мм/с Точность 8K HD Интеллектуальный светодиодный сенсорный экран
Для Golf Club Laser Engraving, nothing matches the precision, скорость, and versatility of ComMarker’s MOPA fiber lasers. The 20 W B6 excels at fine detail and small-batch customizations, в то время как 60–200 W Titan 1 tackles deeper etching, Цветовая маркировка, and high-volume production. Evaluate your personalization needs, толщина материала, and throughput requirements to choose the perfect ComMarker model—then get ready to launch a truly premium, customized golf club engraving service that stands out on and off the green.
