20250116173116

Material Settings for ComMarker Machines

ComMarker laser engravers and markers can engrave and cut a huge variety of materials, from something as slim as tissue paper to something as thick as leather and wood panels. The only limitation may be your imagination.

These laser parameters have been tested mostly with our ComMarker laser engraver, but they can also be applied to other power laser sources in the market. Understand that the result on your material can be different from the result shown in the Photos. That happens for various factors such as other material components, different power laser source quality, a different lens, etc.

Machine: B4 20w
Software: Ezcad2

Engraving pass:
~33 passes (x hatched 45 degrees)
Speed 666
88-90% power
20Khz
0.04 line space

Clean up pass:
4 passes (x hatched 45 degrees)
1000 speed
40% power
60Khz
0.1 line space

Black pass
~2 or 3mm defocused
~1-2 passes
50.80 speed
52.5 power
25khz
1st hatch is 45 degrees spaced at 0.0254
2nd hatch is the same but -45 degrees

black marking

Software Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(mins) 15mins

Setting:    
Process Method Filling/picture
Process Material Stainless steel
Speed(mm/s) 300
Max Power(%)  50
Pass 1
Line space 0.054
Frequency 25

Fiber laser mark black on stainless steel
Machine：B4 20W
200mm lens refocused 3mm
Software：Lightburn
speed： 750
power： 60
frequency： 80khz
Lines per inch：0 .02
2 passes		20240411090208

 

Machine: B6-30w
Software: LightBurn
1st pass：
Power:50%
Speed:500mm/s
Frequèncy:20kHz


2nd pass：
Power:45%
Speed:500mm/s
Frequèncy:35kHz


Clean up pass：
Power:40%
Speed:3500mm/s
Frequèncy:20kHz

Tumbler

 

Machine：B4 30W
110mm lens with correct focus
Software：lightburn
speed:1000
power: 90                                                                                        
frequency：50khz
Lines per inch： 0.02
Angle：45
400 passes

Image mode:3d sliced

Then  finishing
Speed: 2000
Power: 30
Frequency: 100
Lines per inch：0.05
Angle：45

20240411090241

Machine: B6-30w
Software: LightBurn
Power:80%
Speed:1000mm/s
Frequèncy:20kHz
Pulse width:200ns
Line interval:0.0254mm
Image mode:3d sliced
Passes:200
Processing time:2.5hrs

Stainless Coin
Machine：B4 30W
200mm lens as a fill
Software：lightburn
speed:1500
power: 50
frequency：20khz
Lines per inch： 0.025
Angle：45		20240411090246

 

Machine: B6 30w
Software: LightBurn
Power:80%
Speed:1000mm/s
Frequency:20kHz
Line interval:0.0254mm
Image mode. 3d sliced
Passes:200
Processing time:2.5 hrs

3d stone

Basic information:
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Acrylic
Material Info 3mm
Making Time(s) 36

For filling only:
Process Method picture
Process Material Acrylic
Speed(mm/s) 500
Max Power(%) 50
Pass 1

20240422143857
Machine: B6 30w
Software: LightBurn
Power:10%
Speed:1000mm/s
Frequency:20kHz
Pulse width: 200ns
Line interval:0.01mm
Passes:10
Processing time:1.5 hrs		brass stamp

Machine: B6 30w
Software: LightBurn
Engrave:Power:80%
Speed:1000mm/s
Frequèncy: 30kHz
Pulse width: 200ns
Line interval:0.01mm
Passes:8

Cleaning Pass:
Speed:1500mm/s
Power:20%
Line space: 0.01
Frequency: 100
Pass: 2

pcb

Machine: B6-30w
Software: LightBurn
Power:10%
Speed:2000mm/s
Frequency:30kHz
Line interval:0.0254mm
Image mode: Jarvis
Processing time:5 min

photo 30w