Material Settings for ComMarker Machines
ComMarker laser engravers and markers can engrave and cut a huge variety of materials, from something as slim as tissue paper to something as thick as leather and wood panels. The only limitation may be your imagination.
These laser parameters have been tested mostly with our ComMarker laser engraver, but they can also be applied to other power laser sources in the market. Understand that the result on your material can be different from the result shown in the videos. That happens for various factors such as other material components, different power laser source quality, a different lens, etc.
Basic information: Setting: Basic information: Basic information: Basic information: Setting: Basic information: Material Info Making Time(s) 30S Speed(mm/s) 25 Basic information: Machine:ComMarker B4 Mopa Laser Module Output Power:60W Material Used:PCD Material Info:PCD board Making Time(mins):30s Setting: For filling only Process Method:Filling Process Material:PCD board Speed(mm/s):2000 Max Power(%):60 Pass:6 Line space:0.03 Basic information: For filling only: Process Method Hatching Basic information: Basic information: For filling only: Basic information: Engraving Setting: Clean Setting: Basic information: Software： EZCAD2 Setting: Speed(mm/s)： 1000
Basic information: Setting: Basic information: Basic information: Basic information: Setting: Basic information: Material Info Making Time(s) 30S Speed(mm/s) 25 Basic information: Machine:ComMarker B4 Mopa Laser Module Output Power:60W Material Used:PCD Material Info:PCD board Making Time(mins):30s Setting: For filling only Process Method:Filling Process Material:PCD board Speed(mm/s):2000 Max Power(%):60 Pass:6 Line space:0.03 Basic information: For filling only: Process Method Hatching Basic information: Basic information: For filling only: Basic information: Engraving Setting: Clean Setting: Basic information: Software： EZCAD2 Setting: Speed(mm/s)： 1000
Basic information: Setting: Basic information: Basic information: Basic information: Setting: Basic information: Material Info Making Time(s) 30S Speed(mm/s) 25 Basic information: Machine:ComMarker B4 Mopa Laser Module Output Power:60W Material Used:PCD Material Info:PCD board Making Time(mins):30s Setting: For filling only Process Method:Filling Process Material:PCD board Speed(mm/s):2000 Max Power(%):60 Pass:6 Line space:0.03 Basic information: For filling only: Process Method Hatching Basic information: Basic information: For filling only: Basic information: Engraving Setting: Clean Setting: Basic information: Software： EZCAD2 Setting: Speed(mm/s)： 1000Machine :B4 20W
110mm lens refocused 1-2 mm
Software： Ezcad
Speed: 330 or 300
Power: 85 or 80
Frequency: 55 or 50 khz
Software Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(mins) 15mins
Setting:
Process Method Filling/picture
Process Material Stainless steel
Speed(mm/s) 300
Max Power(%) 50
Pass 1
Line space 0.054
Frequency 25
Machine：B4 20W
200mm lens refocused 3mm
Software：Lightburn
speed： 750
power： 60
frequency： 80khz
Lines per inch：0 .02
2 passes
Machine：B4 30W
110mm lens with correct focus
Software：lightburn
speed:1000
power: 90
frequency：50khz
Lines per inch： 0.02
Angle：45
400 passes
Then finishing
Speed: 2000
Power: 30
Frequency: 100
Lines per inch：0.05
Angle：45
Machine：B4 30W
200mm lens as a fill
Software：lightburn
speed:1500
power: 50
frequency：20khz
Lines per inch： 0.025
Angle：45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
Making Time(mins) 10
Process Method Image
Process Material Ceramic tile
Speed(mm/s) 1000
Max Power(%) 40
Pass 1
Line space 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
Frequency 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
Making Time(Hour) 5H
Setting:
Process Method 3D sliced
Process Material Aluminum plate
Speed(mm/s) 2000
Max Power(%) 90
Mode 3D sliced
Interval(mm) 0.0254
Q-Pulse 45
Frequency 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
Making Time(mins) 3min
Setting:
Process Method ID card
Process Material ID card
Speed(mm/s) 2000
Max Power(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board（1mm）
Making Time(mins) 10-15min
Process Method Line
Process Material Silver board（1mm）
Speed(mm/s) 1000
Max Power(%) 90
Frequency 40
Q-pulse width 200
Pass 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
Material Used
Battery,aluminum sheet
Battery,aluminum sheet
Setting:
Process Method Laser Welding
Process Material
Battery,aluminum sheet
Max Power(%) 100
Frequency(KHz) 100
Pass 1
Software:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
Making Time(mins) 3 mins
Setting:
Process Material Rusted coin
Speed(mm/s) 1000
Max Power(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
Making Time(mins) 1 hour
Setting:
Process Method Filling
Process Material Slate
Speed(mm/s) 400
Max Power(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(s) 58
Process Method Filling
Process Material Stainless steel
Speed(mm/s) 120
Max Power(%) 100
Pass 1
Software： LightBurn
Machine： ComMarker B4 60W-mopa
Laser Power：620W
Material Used：BRASS
Material Info： COIN
Making Time(mins)： 6hr50mins
Speed(mm/s)： 2000
Frequency(Khz)： 100
Max Power(%)： 90
Pass： 512
Line space： 0.025
Dot width：
Hatch Mode： 45°
Q Pulse Width (nm)：only for mopa machines 200
Speed(mm/s)： 2500
Frequency(Khz)： 200
Max Power(%)： 90
Pass： 1
Line space： 0.015
Dot width：
Hatch Mode： 45°
Q Pulse Width (nm)：only for mopa machines 200
Machine： ComMarker B4 20W
Laser Power： 20W
Material Used： BRASS
Material Info： COIN
Making Time(mins)： 23MINS
Frequency(Khz)： 30
Max Power(%)： 90
Pass： 157
Line space： 0.02
Dot width：
Hatch Mode：
Q Pulse Width (nm)：only for mopa machines
Machine :B4 20W
110mm lens refocused 1-2 mm
Software： Ezcad
Speed: 330 or 300
Power: 85 or 80
Frequency: 55 or 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(mins) 15mins
Setting:
Process Method Filling/picture
Process Material Stainless steel
Speed(mm/s) 300
Max Power(%) 50
Pass 1
Line space 0.054
Frequency 25Machine：B4 20W
200mm lens refocused 3mm
Software：Lightburn
speed： 750
power： 60
frequency： 80khz
Lines per inch：0 .02
2 passesMachine：B4 30W
110mm lens with correct focus
Software：lightburn
speed:1000
power: 90
frequency：50khz
Lines per inch： 0.02
Angle：45
400 passes
Then finishing
Speed: 2000
Power: 30
Frequency: 100
Lines per inch：0.05
Angle：45Machine：B4 30W
200mm lens as a fill
Software：lightburn
speed:1500
power: 50
frequency：20khz
Lines per inch： 0.025
Angle：45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
Making Time(mins) 10
Process Method Image
Process Material Ceramic tile
Speed(mm/s) 1000
Max Power(%) 40
Pass 1
Line space 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
Frequency 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
Making Time(Hour) 5H
Setting:
Process Method 3D sliced
Process Material Aluminum plate
Speed(mm/s) 2000
Max Power(%) 90
Mode 3D sliced
Interval(mm) 0.0254
Q-Pulse 45
Frequency 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
Making Time(mins) 3min
Setting:
Process Method ID card
Process Material ID card
Speed(mm/s) 2000
Max Power(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board（1mm）
Making Time(mins) 10-15min
Process Method Line
Process Material Silver board（1mm）
Speed(mm/s) 1000
Max Power(%) 90
Frequency 40
Q-pulse width 200
Pass 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
Material Used
Battery,aluminum sheet
Battery,aluminum sheet
Setting:
Process Method Laser Welding
Process Material
Battery,aluminum sheet
Max Power(%) 100
Frequency(KHz) 100
Pass 1
Software:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
Making Time(mins) 3 mins
Setting:
Process Material Rusted coin
Speed(mm/s) 1000
Max Power(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
Making Time(mins) 1 hour
Setting:
Process Method Filling
Process Material Slate
Speed(mm/s) 400
Max Power(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(s) 58
Process Method Filling
Process Material Stainless steel
Speed(mm/s) 120
Max Power(%) 100
Pass 1
Software： LightBurn
Machine： ComMarker B4 60W-mopa
Laser Power：620W
Material Used：BRASS
Material Info： COIN
Making Time(mins)： 6hr50mins
Speed(mm/s)： 2000
Frequency(Khz)： 100
Max Power(%)： 90
Pass： 512
Line space： 0.025
Dot width：
Hatch Mode： 45°
Q Pulse Width (nm)：only for mopa machines 200
Speed(mm/s)： 2500
Frequency(Khz)： 200
Max Power(%)： 90
Pass： 1
Line space： 0.015
Dot width：
Hatch Mode： 45°
Q Pulse Width (nm)：only for mopa machines 200
Machine： ComMarker B4 20W
Laser Power： 20W
Material Used： BRASS
Material Info： COIN
Making Time(mins)： 23MINS
Frequency(Khz)： 30
Max Power(%)： 90
Pass： 157
Line space： 0.02
Dot width：
Hatch Mode：
Q Pulse Width (nm)：only for mopa machinesMachine :B4 20W
110mm lens refocused 1-2 mm
Software： Ezcad
Speed: 330 or 300
Power: 85 or 80
Frequency: 55 or 50 khzSoftware Lightburn
Machine ComMarker B4
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(mins) 15mins
Setting:
Process Method Filling/picture
Process Material Stainless steel
Speed(mm/s) 300
Max Power(%) 50
Pass 1
Line space 0.054
Frequency 25Machine：B4 20W
200mm lens refocused 3mm
Software：Lightburn
speed： 750
power： 60
frequency： 80khz
Lines per inch：0 .02
2 passesMachine：B4 30W
110mm lens with correct focus
Software：lightburn
speed:1000
power: 90
frequency：50khz
Lines per inch： 0.02
Angle：45
400 passes
Then finishing
Speed: 2000
Power: 30
Frequency: 100
Lines per inch：0.05
Angle：45Machine：B4 30W
200mm lens as a fill
Software：lightburn
speed:1500
power: 50
frequency：20khz
Lines per inch： 0.025
Angle：45
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Ceramic
Material Info Ceramic tile
Making Time(mins) 10
Process Method Image
Process Material Ceramic tile
Speed(mm/s) 1000
Max Power(%) 40
Pass 1
Line space 0.05
Dot width Enable
Dot width 0.06
Mode Jarvis
Frequency 130
Q-pulse Width 30
Software Lightburn
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Aluminum plate
Material Info Aluminum plate
Making Time(Hour) 5H
Setting:
Process Method 3D sliced
Process Material Aluminum plate
Speed(mm/s) 2000
Max Power(%) 90
Mode 3D sliced
Interval(mm) 0.0254
Q-Pulse 45
Frequency 100
Passing count 500
Bi-directional scanning Enable
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used ID card
Material Info ID card
Making Time(mins) 3min
Setting:
Process Method ID card
Process Material ID card
Speed(mm/s) 2000
Max Power(%) 40
Pass 1
Line space 0.03
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser Marking Machine
Laser Module Output Power 60W
Material Used Silver
Material Info Silver board（1mm）
Making Time(mins) 10-15min
Process Method Line
Process Material Silver board（1mm）
Speed(mm/s) 1000
Max Power(%) 90
Frequency 40
Q-pulse width 200
Pass 1
Wobble Enable
Diameter 0.3
Distance 0.01
Software EZCAD
Machine ComMarker B4 Mopa Laser Engraving Machine
Laser Module Output Power 60W
Material Used
Battery,aluminum sheet
Battery,aluminum sheet
Setting:
Process Method Laser Welding
Process Material
Battery,aluminum sheet
Max Power(%) 100
Frequency(KHz) 100
Pass 1
Software:EZCAD
Software EZCAD
Machine ComMarker B4 Mopa Fiber Laser
Laser Module Output Power 60W
Material Used Rusted coin
Material Info Rusted coin
Making Time(mins) 3 mins
Setting:
Process Material Rusted coin
Speed(mm/s) 1000
Max Power(%) 90
Pass Depends on how rusted the material is
Line space 0.05
Software Lightburn
Machine ComMarker B4 JPT MOPA Fiber Laser Marking Machine
Laser Module Output Power 30W
Material Used Slate
Material Info 5mm slate
Making Time(mins) 1 hour
Setting:
Process Method Filling
Process Material Slate
Speed(mm/s) 400
Max Power(%) 100
Mode 3D Sliced
Interval 0.04
Dot width 0.04
Software Ezcad
Machine ComMarker B4 20w
Laser Module Output Power 20W
Material Used Stainless steel
Material Info 1mm
Making Time(s) 58
Process Method Filling
Process Material Stainless steel
Speed(mm/s) 120
Max Power(%) 100
Pass 1
Software： LightBurn
Machine： ComMarker B4 60W-mopa
Laser Power：620W
Material Used：BRASS
Material Info： COIN
Making Time(mins)： 6hr50mins
Speed(mm/s)： 2000
Frequency(Khz)： 100
Max Power(%)： 90
Pass： 512
Line space： 0.025
Dot width：
Hatch Mode： 45°
Q Pulse Width (nm)：only for mopa machines 200
Speed(mm/s)： 2500
Frequency(Khz)： 200
Max Power(%)： 90
Pass： 1
Line space： 0.015
Dot width：
Hatch Mode： 45°
Q Pulse Width (nm)：only for mopa machines 200
Machine： ComMarker B4 20W
Laser Power： 20W
Material Used： BRASS
Material Info： COIN
Making Time(mins)： 23MINS
Frequency(Khz)： 30
Max Power(%)： 90
Pass： 157
Line space： 0.02
Dot width：
Hatch Mode：
Q Pulse Width (nm)：only for mopa machines
