レーザー彫刻家を調査したことがあるなら, あなたはおそらく同じ制限に何度も出くわした:
- ダイオードレーザー can’t engrave on glass or clear acrylic.
- ファイバーレーザー can’t touch wood.
- CO₂レーザー can’t engrave raw metal.
But what if I told you there’s another type of laser engraver—one that can engrave all of those materials, もっと? I’m talking about UV laser engraving.
今日, I’m sharing my full review and real-world test results using the コムマーカーオムニ 1, a UV laser engraver that, quite frankly, blew me away. If you’re looking for a versatile machine for your DIY workshop or laser engraving business, this review is for you.
Commarker Omniのボックス化 1: Setup in Minutes
Let’s start with the basics. ザ・オムニ 1 UV laser engraver came in three large parts:
- の base (pre-attached cables)
- の tower (vertical column)
- の laser module
Assembly was simple—just 8 screws total. Four to attach the tower to the base, and another four to mount the laser head. その後, plug in the cables and you’re ready to go. No complicated setup, no confusing wiring.
正直に, if you’ve ever struggled putting together a diode or CO₂ machine, this is refreshingly easy.
ヒントの場合: It ships with two lenses—150mm and 75mm. I did most of my tests with the 150mm lens.
What Is a UV Laser Engraver (And Why It’s So Special)?
コムマーカーオムニ 1 aです UVレーザー彫刻機, operating at 355nm with a 5W power rating. 今, you might think 5 watts sounds weak—but don’t let that fool you.
Due to its 短波長, the UV beam interacts differently with materials compared to CO₂ or diode lasers. It doesn’t rely on heat to burn or vaporize the surface. その代わり, それ breaks molecular bonds, which makes it 完璧 for high-detail, low-damage engraving.
And the results? They speak for themselves.
1 – Engraving on Aluminum Business Cards
Let’s start small—literally. I engraved a portrait and a logo onto black-coated aluminum business cards.
- 結果: Razor-sharp lines, no smudging, incredibly small spot size.
- Detail Level: Think photorealistic at the size of a quarter.
This test alone showed me that the Omni 1 could handle the kind of precision normally reserved for machines triple the price.
2 – Engraving on Wood
今, you might assume UV lasers aren’t ideal for wood—but guess what? It engraved my sample wood blocks beautifully.
ヒント: Settings matter. My first test ran too powerful and scorched the wood. Once I dialed in the 頻度, Qパルス, and line spacing, the engraving looked amazing.
No soot, no char, just a clean, crisp image of my daughter on birch.
3 – Ceramic Coasters
One of my favorite materials to engrave is ceramic, そしてオムニ 1 nailed this job.
- No masking tape
- No pre-treatment
- Just pure UV power directly onto the surface.
If you’re thinking of adding engraved coasters to your product line—wedding gifts, company swag—this machine can handle it with ease.
4 – Stainless Steel and Brass
Here’s where the ComMarker Omni 1 truly shined.
- ステンレス鋼: Produced a deep black mark that I’ve never been able to get from my fiber laser.
- Brass Coins: Dark, legible, and no distortion, even on small text.
This alone makes it a great 金属用レーザー彫刻機 if you want high-contrast marking without a fiber laser.
5 – Engraving on Felt & Cutting Cleanly
ザ・オムニ 1 includes some felt samples, and engraving was perfect—clean, no burn-through on the backside.
But I also tested cutting felt, using a thin cross shape. The cut was sharp, と zero char or melted edges. 正直に, it looked like I used a scalpel, not a laser.
6 – Wax Tin Labels
Normally I use printed labels for my wax tins—but this time I engraved directly onto the metal lid. No smudging, no irregularities. The UV beam handled the curved surface and coating like a champ.
This could be a total game-changer for product packaging.
7 – Clear Acrylic and Glass
Here’s the moment you’ve been waiting for.
Clear acrylic? チェック.
ガラス? 絶対に.
No marking spray. No coating. Just place the object on the bed and go.
I tested:
- A flat glass panel with my logo
- A reused pickle jar
- A glass ornament (with gold paint fill)
All engraved beautifully. The only challenge was with round objects—without a rotary tool, getting the focus right is tricky. But with a rotary? You’re in business.
Business idea: Engraved ornaments, ワイングラス, 結婚式の好意.
8 – Leather Patches
I engraved both brown and gray leather patches. The results were surprisingly consistent:
- No burn smell
- No cleanup needed
- Just clean, 定義された行
These are ready to press onto hats or bags—no extra steps required.
9 – Cutting 3mm Wood (はい, 切断!)
Most people say UV lasers are for marking only. But I tried cutting 3mm birch plywood using the inlay pattern “Faith,” and…
It cut beautifully.
There was no charring on the edges, no burning smell, and the final piece popped out easily. For hobbyists or small crafts, this machine can absolutely double as a cutter on thin materials.
10 – FOOD ENGRAVING (はい, 真剣に!)
I engraved:
- An apple
- An orange
結果? No burnt smell. No flavor change. Just clear, surface-level engraving.
While you’re probably not engraving fruit daily, imagine this: engraved cookies or macarons for weddings, 誕生日, or branded events. That’s a whole new revenue stream.
コムマーカーオムニ 1 レーザー彫刻機
あらゆる素材を解き放つ次世代レーザー. ZeroBurn™ 彫刻テクノロジー 世界初の 16K HD レーザー彫刻機 10,000mm/s SpeedMax™ 彫刻システム UV レーザーですべての素材のロックを解除 ColdFront™ サーマルテクノロジー 電動リフティング 2 EZCADおよびLightBurn 360°回転彫刻システムと互換性のあるオプションのレンズ
Who Is This Laser Engraver For?
If you’re looking for a laser engraver that can handle every material, the ComMarker Omni 1 UV laser is a solid choice.
- Not just for hobbyists
- Great for small business owners
- Perfect for people unsure what niche to start in
$4,000 might sound high, but considering it replaces the need for multiple machines (ダイオード, ファイバ, CO₂), it’s actually a good deal.
You could start engraving:
- ドッグタグ
- Ornaments
- 木材の標識
- ガラス製品
- コースター
- Leather patches
- 包装
- Business gifts
- Even food
—without needing to buy a second laser.
Quick Specs: コムマーカーオムニ 1 紫外線
- レーザーの種類: 紫外線, 355nmの波長
- 力: 5W
- レンズ: 150んん (included), 75mm optional
- Supported Materials: 金属, プラスチック, ガラス, セラミック, 木, レザー, アクリル, 食べ物, もっと
- Spot Size: Extremely fine for high-resolution detail
- Focus System: Dual red dot alignment + motorized focus
- 制御ソフトウェア: LightBurn compatible
- 囲い & ロータリー: Optional accessories available
Is the ComMarker Omni 1 the Best Laser Engraver in 2025?
If versatility is your top priority, this might be the best laser engraver for 2025—especially for beginners who want room to grow or pros looking to expand into new materials.
🔗 Check current pricing and bundles on ComMarker’s official store →
