Introdução:
Recentemente, some friends questioned me about how to gravador a laser black on metal. Então, estamos aqui para lhe oferecer uma maneira fácil de encontrar a maneira de gravar preto a laser no metal..
The main point of laser engraving dark on the metal is to keep the propel focus inside the right one.
With the same parameter, in the propel focus, it doesn’t engrave the black; inside, it burns the metal with greater power.
Only until we find the suitable focus for back marking will it give the pretty black.
So how do we find the right focus to engrave dark?
Informação básica:
ComMarker B4 20W gravador a laser de fibra máquina
We will tell you in this article.Basic information:
Programas | Queimadura de luz |
Máquina | ComMarker B4 |
Potência de saída do módulo laser | 20C |
Material usado | Aço inoxidável |
Informações materiais | 1milímetros |
Fazendo tempo(minutos) | 15minutos |
Contexto:
Método de Processo | Filling/picture |
Material de Processo | Aço inoxidável |
Velocidade(mm/s) | 300 |
Poder maximo(%) | 50 |
Passar | 1 |
Espaço de linha | 0.054 |
Frequência | 25 |
Instrução:
Step1
Input some text for the test, and set the parameter as the instruction.
Step2
Set the laser engraver to the right focus.
Step3
Play the laser engraver and change the focus according to light strength until it reaches the propel focus.
Step4
After getting the right focus distance, you may measure it and keep it for further use.
Step5
Input the file that you need to engrave.
Step6
Set the parameter according to the suggested setting.
Step7
Laser-engrave the thing you want.