Introducción:
We found that many of our friends urge us to try something interesting. So we are here to give you some inspiration for different kinds of grabadores láser‘ uses.
Today we bring the method of 2.5D laser engraving, and we hope you may like it. If you are also into 2.5D laser engraving, keep reading this article.
Actually, the picture for 2.5D laser engraving needs to be converted from STL, but some of the black and white are already converted and can be used directly in Lightburn.
Información básica:
Software | quemadura de luz |
Máquina | ComMarker B4 JPT Láser de fibra MOPA Máquina de marcado |
Potencia de salida del módulo láser | 30W |
Material utilizado | Pizarra |
Información del material | 5mm slate |
Haciendo tiempo(minutos) | 1 hora |
Configuración:
Método de proceso | Relleno |
Material de proceso | Pizarra |
Velocidad(mm/s) | 400 |
Máximo poder(%) | 100 |
Mode | 3D Sliced |
Intervalo | 0.04 |
Ancho de punto | 0.04 |
Instrucción:
Paso 1
Test the material you want to laser engrave for the suitable parameter to achieve the effect you want.
Paso 2
Input the picture.
Paso 3
Set the parameter.
Etapa 4
Mantente paciente, and your work will be finished within a few hours.