Glass engraving has traditionally been the domain of rotary tools and sandblasting, but with a fiber laser and a little prep work, you can achieve crisp, detailed etchings on glass surfaces—no special attachments required. Ci-dessous, we’ll walk you through a proven three-step process, originally shared by one of our customers, and show you how to adapt it to your ComMarkerName graveur laser à fibre for consistent, high-contrast results.
Why Fiber Laser for Glass?
Most fiber lasers operate around 1064 nm, a wavelength that glass does not absorb efficiently. Cependant, by using a temporary marking layer, you can harness the pinpoint focus and high speeds of a fiber laser—like a ComMarker B6 JPT MOPA ou ComMarker Titan 1—to leave a permanent, frosted design on your glass. The benefits:
- Précision: Micron-level focus yields sharp edges and fine details.
- Vitesse: Engrave in seconds—with speeds up to 15,000 mm/s on ComMarker machines.
- Polyvalence: No need for rotary fixtures; flat glass, bouteilles, and vases all work.
- Durabilité: The final etch is permanent, weather-resistant, and dishwasher-safe.
What You’ll Need
- Glass item—anything from flat panels to wine bottles.
- Rust-Oleum 2X paint (Ivory Silk or flat white)—temporary marking layer.
- Paint sprayer or aerosol—for even coverage.
- Paint thinner—for post-engraving cleanup.
- Graveur laser à fibre ComMarker—we recommend a 20 W+ unit with MOPA capability for optional color marking.
Étape 1: Prep & Paint Your Glass
- Clean thoroughly—remove oils, empreintes digitales, and dust with isopropyl alcohol.
- Spray a thin, even coat of Rust-Oleum 2X Ivory Silk (or flat white) over your engraving surface.
- Hold can 8–12 inches away for a fine mist.
- Rotate bottles or move panels to avoid drips.
- Let it dry completely—at least 15–20 minutes in a dust-free area.
- Optional second coat if coverage is uneven.
Why Rust-Oleum? Its flat finish absorbs laser energy consistently, so you’ll get uniform etches without glaze or hotspots.
Étape 2: Paramètres laser & Mise au point
With your glass painted and dry, it’s time to dial in your ComMarker settings:
| Paramètre | Recommended Value |
|---|---|
| Puissance laser | 20–30 % (start low, then adjust) |
| Vitesse | 10 mm/s (for deep etch) |
| Fréquence | 80 kHz |
| Line Spacing | 0.1 millimètre (100 µm) |
| Mode hachures | 45° or “Crosshatch” for uniform fill |
| Laissez-passer | 1 (usually sufficient) |
- Mise au point automatique your ComMarker head on the painted surface.
- Run a quick test on scrap glass or painted tile with a small circle to verify contrast.
- Ajuster la puissance dans 5 % increments if your etch is too shallow or too dark (risks chipping the paint).
Étape 3: Graver & Clean Up
- Graver your design—vector cut or bitmap hatch. The laser vaporizes the paint layer, exposing the frosted glass below.
- Wipe away the remaining paint with a lint-free cloth dampened in paint thinner or acetone.
- Rinse and dry the glass to remove any residue.
Le résultat? A crisp white frosted design that’s fully bonded into the glass surface.
Pro Tips for Spectacular Results
- Keep it thin: Thick paint layers can lead to uneven etching or flaking.
- Mind the edges: Avoid painting over curved or lip areas—focus on the flat center for best focus.
- Test small: Always run a 10 × 10 mm test square to fine-tune settings before your final piece.
- Use MOPA: Si tu as un ComMarker Titan 1, try longer pulse widths for subtle color shifts (grey, bronze) on clear glass.
- Safety first: Wear laser-safe goggles and ensure proper ventilation when using solvents.
Why Choose ComMarker for Glass Engraving?
- Reliable MOPA Laser Modules (20 W–200 W) designed for industrial uptime.
- Precision Optics that maintain focus across wide engraving fields.
- Logiciel convivial: LightBurn and EZCad2 compatibility for seamless file prep.
- Sécurité & Soutien: Enclosed Class 1 dessins, responsive tech support, and robust training materials.
Whether you’re a hobbyist decorating shot glasses or a pro-shop offering high-end engraved trophies, ComMarkerName fiber lasers unlock glass engraving like never before. Ready to elevate your creativity? Explore our full lineup of fiber laser engravers and start etching memories in glass today!
